Atoll AM200 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Atoll AM200 (8 sivua) kategoriassa Vastaanotin. Tämä opas oli hyödyllinen 33 henkilölle ja sai 4.1 tähden keskimäärin 9 käyttäjältä

ATOLL ELECTRONIQUE

OWNER’S MANUAL ~ AMPLIFIERAM200 Sig

ATOLL ELECTRONIQUEPage 5Page 4

To transform your Power Amplifier from Stereo to Mono, you have to push the switch

a

placed inside the appliance as shown below:

BRIDGE MONO MODE

Warning: be sure that your amplier is unplugged and that no other appliance is

plug-in during this operation.

(Configuration: 1 Preamplifier & 2 bridged mono amplifier).

CONNECTINGS

PREAMP

AMP 1

AMP 2

L

R

AMPLI

INOUT

POWER

LEFTRIGHT

DO NOT

OPEN

NE PAS

OUVRIR

SERIAL NUMBER

NUMERO DE SERIE

MADE IN FRANCE

FABRIQUE EN FRANCE

+

+

–

–

L

R

PRE-OUT

POWER

RIGHTLEFT

DO NOT OPEN

NE PAS OUVRIR

SERIAL NUMBER

NUMERO DE SERIE

MADE IN FRANCE

FABRIQUE EN FRANCE

DO NOT

OPEN

NE PAS

OUVRIR

SERIAL NUMBER

NUMERO DE SERIE

MADE IN FRANCE

FABRIQUE EN FRANCE

+

+

+–+–

–

–

AMPLI

INOUT

L

R

a

Internal view

a

LEFT

1) Ampli input and output (line).

2) General power plug and ON/OFF

button (with internal fuse).

3) Left channel output.

4) Right channel output.

5) 12V

Trigger input

(1)

.

6) Power indicator led.

CONNECTINGS + TRIGGER

DETAILS OF FUNCTIONS

41235

6

(1)

Trigger input: This input allows the control ON/OFF of your

amplifier simultaneously to any device with a 12V Trigger

outlet. For the system to operate, the On/Off button on your

AM200 must remain in the off position (0). If the switch is in

the ON position (I), the amplifier will work but not the Trigger

function.

Trigger cable must be a Male to Male stereo jack plug Ø 3,5 mm (1/8”).

Jack

Ø 3,5 mm

Tuotetiedot