StarTech.com SV231TDVIUA Käyttöohje

StarTech.com Kytkin SV231TDVIUA

Lue alta 📖 käyttöohje suomeksi merkille StarTech.com SV231TDVIUA (15 sivua) kategoriassa Kytkin. Tämä opas oli hyödyllinen 11 henkilölle ja sai 4.8 tähden keskimäärin 6 käyttäjältä

Lataa PDF

Sivu 1/15

Manual Revision: 04/01/2022

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SV231TDVIUA

SV431TDVIUA

2/ 4 Port Triple Monitor DVI USB KVM Switch

with Audio and USB 2.0 Hub

*SV431TDVIUA shown

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A).

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any

interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils

radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) L’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit

accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an

endorsement of the product(s) to which this manual applies by the third-party company

Instruction Manual

Table of Contents

Introduction ............................................................................................1

Packaging Contents 1 .................................................................................................................................

System Requirements 1 ..............................................................................................................................

Front View ....................................................................................................................................................2

Rear View ......................................................................................................................................................2

Installation ..............................................................................................3

Hardware Installation 3 ..............................................................................................................................

Driver Installation 4 ......................................................................................................................................

Operation ................................................................................................4

Front Panel 4 ...................................................................................................................................................

Hotkey Control 5 ...........................................................................................................................................

Alternative Hotkey Commands 8 ............................................................................................................

Change Leading Hotkey 9 .........................................................................................................................

Specications 10 ..........................................................................................

Technical Support ..................................................................................11