Panduit EF001 Käyttöohje
Sivut 2 Engels USB-keskitin
Lue käyttöohje merkille Panduit EF001 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 54 henkilölle. Kysyttävää mallista? Esitä kysymys
Customer Service: CS@panduit.com 800.777.3300
Technical Support: techsupport@panduit.com 866.405.6654
page 1
INSTALLATION GUIDE
Sensor Hub (EF001)
Sensor Hub allows for 3 additional sensor ports to be added to iPDU. Two (2) Sensor Hubs can be installed
with a PDU allowing for 8 sensor measurements.
Environmental sensors are engineered with an embedded microchip that
converts analog signals to digital format before data travels to the PDU,
providing greater data accuracy. This smart design also enables easy plug &
play installation that takes just moments to complete.
The Sensor Hub allows for up to 8 environmental factors to be measured
and monitored per PDU to allow for greater eciency and favorable
operating conditions.
SPECIFICATION
Electrical
Requirement
Operational voltage
5V DC
Range
0 to 4m/s
Accuracy
±°5% (25 FS C characteristic)
Physical
Wire Length
3 m
Wire Type
CAT.5E Patch Cable, UTP
Environmental
Temperature (Operating/Storage)
0°C~+60°C (32 ~ 140°F)/-20~ + 70°C (-4 ~ 158°F)
Humidity(Operating/Storage)
35% to85%non RH,-condensing
Compliance
Environmental Verication
ROHS, WEEE
SENSOR INVENTORY
Tuotetiedot
| Merkki: | Panduit |
| Kategoria: | USB-keskitin |
| Malli: | EF001 |
Tarvitsetko apua?
Jos tarvitset apua merkille Panduit EF001 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kaikki Panduit USB-keskitin käyttöohjeet