Kramer VS-42HDCP Käyttöohje

Kramer Ei luokiteltu VS-42HDCP

Lue alta 📖 käyttöohje suomeksi merkille Kramer VS-42HDCP (48 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.9 tähden keskimäärin 8 käyttäjältä

Sivu 1/48
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VS
-42HDCP
4x2 DVI Matrix Switcher
P/N: 2900-300218 Rev 5
VS-42HDCP Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 About Fast Switching 5
3.2 Defining the VS-42HDCP 4x2 DVI Matrix Switcher 5
4 Installing in a Rack 8
5 Connecting the VS-42HDCP 9
6 Operating the VS-42HDCP 4x2 DVI Matrix Switcher 11
6.1 Routing Inputs to Outputs 11
6.2 Disconnecting the Outputs 11
6.3 Storing and Recalling a Switching Setting 12
6.4 Changing the Port Switching Speed 13
6.5 Setting HDCP to On/Off 13
6.6 Locking and Unlocking the Front Panel 14
6.7 Switching Between Protocol 2000 and Protocol 3000 14
6.8 Acquiring the EDID 14
6.9 Resetting the IP Parameters 15
7 Controlling the VS-42HDCP 16
7.1 Connecting to the VS-42HDCP via RS-232 16
7.2 Connecting via Ethernet 16
7.3 Using the IR Transmitter 17
7.4 Firmware Upgrade 18
8 Technical Specifications 19
9 Default Communication Parameters 20
10 Default EDID 21
11 Kramer Protocol 2000 23
12 Protocol 3000 26
12.1 Kramer Protocol 3000 Syntax 26
12.2 Kramer Protocol 3000 Commands 29
12.3 Kramer Protocol 3000 Detailed Commands 30
Figures
Figure 1: VS-42HDCP 4x2 DVI Matrix Switcher Front Panel 6
Figure 2: VS-42HDCP 4x2 DVI Matrix Switcher Rear Panel 7
Figure 3: Connecting to the VS-42HDCP Rear Panel 10

Tuotetiedot

Merkki: Kramer
Kategoria: Ei luokiteltu
Malli: VS-42HDCP

Tarvitsetko apua?

Jos tarvitset apua merkille Kramer VS-42HDCP esitä kysymys alla ja muut käyttäjät vastaavat sinulle