Kramer ACC3-12-SP Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Kramer ACC3-12-SP (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 33 henkilölle ja sai 4.6 tähden keskimäärin 2 käyttäjältä

ACC3--12SP Quick Start

P/N:

2900-301681QS

Rev:

2

Scan for full manual

ACC3-- Quick Start Guide 12SP

This guide helps you install and use your ACC3--12SP for the rst time.

Go to www.kramerav.com/downloads/ACC3--12SP to download the latest user manual and check if

rmware upgrades are available.

Step 1: Check in the bwhat’sox

ACC3--12SP 1:2 CAT Cable Splitter

1 Bracket set

4 Rubber feet

1 Quick start guide

Step 2: Get to know your ACC3-- 12SP

#

Feature

Function

1

CAT A+B -45 Port RJ

Connect to a compatible CAT transmitter (for example an ) to send SWT3--U-T41

combined signals over the A+B port.

Make sure the Dual CAT extension is set to active via CAT transmitter

embedded webpages.

2

CAT A RJ-45 Port

Connect to a compatible CAT receiver (for example an EXT3--RUE, EXT3-U-R).

3

CAT B RJ-45 Port

Connect to a compatible CAT receiver (for example an EXT3--RUE, EXT3-U-R).

Step 3: Mount ACC3-- 12SP

Install using one of the following methods: ACC3--12SP

•Attach the rubber feet and place the unit on a at surface.

•Fasten a bracket (included) on each side of the unit and attach it to a at surface

(see www.kramerav.com/downloads/ACC3--12SP).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/ACC3--12SP).

•Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Tuotetiedot