Havis C-DMM-114 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Havis C-DMM-114 (6 sivua) kategoriassa Autosarja. Tämä opas oli hyödyllinen 38 henkilölle ja sai 4.2 tähden keskimäärin 7 käyttäjältä

The Dash Monitor Mount bracket system requires two or three main parts that

are Sold Separately. See web site Monitor Configurator for more detailed

bracket information.http://www.havis.com/monitor_mounts.htm

•1 - Vehicle Specific dash mount bracket. (C-DMM-114)

•1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)

•1 - Offset adaptor bracket. (C-MM-301)

The C-MM-301 offset adaptor goes between the C-DMM-114 and C-MM-2XX.

It may not be required in some applications.

TOOLS REQUIRED:

• Ratchet Wrench

• Socket Set

• Open End Wrenches - 7/16”, 1/2”

• Phillips Screwdriver (short)

HARDWARE:

QTY: DESCRIPTION: PART #:

2 1/4” x 3/4 Hex Bolt GSM33001

2 1/4” Flat Washer GSM31005

2 1/4” Nylon retaining washer GSM31322

6 1/4-20 Hex Flange Serrated Nut GSM30023

4 10/32 x 1/2 Flat Head Machine Screw GSM33072

4 Rubber Bumpers (stick on) GSM19802

1Monitor Adapter Hardware Varies (monitor specific)

ALWAYS!

• Read all instructions before installing any Havis, Inc products.

• Use hardware provided with install kit

Note:

The swing door utilizes a gas spring to assist in opening the door and to eliminate the

possibility of it slamming shut. If additional damping is desired because of heavier equipment, an

optional stronger gas spring is available under Part Number CM86662-30 (sold separately)

Installer must change out gas spring as needed.

INSTALL INSTRUCTIONS

C-DMM-114

2007-2014 TAHOE SWING-OUT DASH MONITOR MOUNT

Tuotetiedot