Metra 99-6000 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Metra 99-6000 (2 sivua) kategoriassa Autosarja. Tämä opas oli hyödyllinen 53 henkilölle.

99-6000

INSTALLATION

INSTRUCTIONS

KIT COMPONENTS

TOOLS REQUIRED

Cutting tool

Panel removal tool

Phillips screwdriver

KIT FEATURES

Pocket

provisions

Radio Housing

34

Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adaptor and making

connections as shown. (Isolate and

individually tape off the ends of any

unused wires to prevent electrical short

circuit).

Re-connect the battery terminal and test the unit

for proper operation. Mount the head unit/kit

assembly to the sub-dash with those screws

previously removed in step #1.

A

B

C

D

A) Strip wire ends back ½"

B) Twist ends together

C) Solder

D) Tape

DIN HEAD UNITS: Slide the DIN cage into the kit and secure by bending the metal locking

tabs down. Slide the aftermarket head unit into the cage until secure.

ALL VEHICLES

2

3

APPLICATIONS

CHRYSLER / DODGE / EAGLE / JEEP

PLYMOUTH VEHICLES 1974-00

(SEE INSIDE FOR SPECIFIC APPLICATIONS)

1-800-221-0932 www.metraonline.com

© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION

rev. 230701

Tuotetiedot