Brother HL-L1232W Käyttöohje

Brother Tulostin HL-L1232W

Lue alta 📖 käyttöohje suomeksi merkille Brother HL-L1232W (2 sivua) kategoriassa Tulostin. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.3 tähden keskimäärin 19 käyttäjältä

Sivu 1/2
Unpack the machine and check the components
Toner Cartridge
A5 Paper Long Edge
Support
Quick Setup Guide
Product Safety Guide
1
Remove the packing materials and install the toner cartridge
2
3
Connect the power cord and turn the machine on
Back Front
NOTE:
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
• The screens and images in this show the HL-L1232W.Quick Setup Guide
• Brother aims to reduce waste and save both raw materials and the energy
required to produce them.
Read more about our environmental work at www.brotherearth.com.
• Save all packing materials and the box in case you need to ship your
machine.
Remove the protective tape or film covering the machine and the supplies.
Adjust the paper guides to fit the
paper being used.
For the long edge of A5 paper
Power Off
Ready
Data Remaining
Sleep
Deep Sleep
Warming Up
Cooling Down
Receiving Data Toner Low Replace Toner Paper Jam
Drum End Soon
Replace Drum
Dimmed 1 second interval 0.5 second interval
Printer LED Indications
Blinking: or ON: OFF:
Make sure the printing
surface is face up.
Quick Setup Guide
Read the for the correct installation procedure.Product Safety Guide Quick Setup Guidefirst,thenreadthis
Not all models are available in all countries.
The latest manuals are available on the Brother support website:
support.brother.com/manuals
EN
HL-L1230W / HL-L1232W
D033J1001-00
UK
Version 0

Tuotetiedot

Merkki: Brother
Kategoria: Tulostin
Malli: HL-L1232W

Tarvitsetko apua?

Jos tarvitset apua merkille Brother HL-L1232W esitä kysymys alla ja muut käyttäjät vastaavat sinulle