Alogic UL2QC10CA Käyttöohje

Alogic Akun laturi UL2QC10CA

Lue alta 📖 käyttöohje suomeksi merkille Alogic UL2QC10CA (2 sivua) kategoriassa Akun laturi. Tämä opas oli hyödyllinen 39 henkilölle ja sai 4.3 tähden keskimäärin 20 käyttäjältä

Sivu 1/2
Operation Instructions
To commence charging, plug the included power adapter to a power wall socket and
proceed to connect the other end to the Power Hub, located on the back. Two white LED
lights will appear to indicate that the device is on.
For Wireless Charging:
For Wired Charging:
1. LED lights will turn solid white to indicate that the device is in standby mode and is ready
to be used
Power Hub. Make sure that the centre of your device is aligned with one of the Qi logos
on top of the charger.
3. The LED lights will appear to breath slowly to indicate that a successful connection has
been established and wireless charging has commenced.
4. In the event that a foreign object is detected (FOD) or if your device is emitting high
temperatures the LED indicator will flash red.
1. To charge a device via the USB-A port, connect the USB-A end of your existing compat-
ible cable to the Power Hub’s USB-A port and the other end to your device, charging
should commence immediately.
2. To charge a device via the USB-C port, connect the USB-C end of your existing compat-
ible cable to the Power Hub’s USB-C port and the other end to your device, charging
should commence immediately.

Tuotetiedot

Merkki: Alogic
Kategoria: Akun laturi
Malli: UL2QC10CA

Tarvitsetko apua?

Jos tarvitset apua merkille Alogic UL2QC10CA esitä kysymys alla ja muut käyttäjät vastaavat sinulle