Waves Z-Noise Käyttöohje
Waves
Audio-ohjelmisto
Z-Noise
Lue alta 📖 käyttöohje suomeksi merkille Waves Z-Noise (16 sivua) kategoriassa Audio-ohjelmisto. Tämä opas oli hyödyllinen 19 henkilölle ja sai 4.5 tähden keskimäärin 10 käyttäjältä
Sivu 1/16
Waves Z-Noise
Softwar
e Audio Processor
Users Guide
Waves ZNoise Users Guide
1
Waves ZNoise Users Guide
2
1. Introduction
Waves Z-Noise is a single-ended broadband noise reduction audio processor. It
very effectively reduces noise while preserving the highest audio quality.
Superficially, Z-Noise works like other broadband noise reduction processors
which use a noise profile, or noise print, to differentiate valid signal from noise.
However, Z-Noise uses intelligent multi-level decision algorithms to maximize
noise reduction with minimum unwanted artifacts. Plus, Z-Noise uses a more
musical band spilt method for more natural results throughout the sound
spectrum.
Z-Noise is ideal for removing additive noise such as tape hiss, vinyl surface
damage, wind, air conditioner and ventilation system noise. Z-Noise offers
several improvements, including:
• Z-Noise works on the complete frequency spectrum, thus high-frequency
hiss and low-frequency rumble can be removed in the same pass. It is a
truly broadband noise removal tool.
• Real-time operation allows you to adjust parameters and hear the
results immediately.
There are several new features in Z-Noise which address problems unique to
broadband noise reduction:
• Extract Profile Mode – Not always do you have a section of pure noise from
which to create a noise profile. Using the Extract Noise Profile feature, you
can create a noise profile from a noise sample which is “contaminated” by
program material which you wish to save.
• Adaptive Mode - You do not necessarily need to create a noise profile in
order to reduce noise. In the Adaptive Mode, Z-Noise extracts a noise profile
on-the-fly and reduces the noise even if the profile changes over time.
• Better transient treatment –
Z-Noise offers improved transient handling as
well as enhanced transient processing options that allow for greater noise
reduction with less transients smearing.
Z-Noise can detect and enhance
transients prior to noise reduction processing, then de-enhance the transients
after noise reduction, thus allowing for more aggressive noise reduction while
preserving transients.
• Enhanced Noise profile adjustments – In both the normal and adaptive
modes, Z-Noise allows you to control the spectral nature of the noise profile.
In this manner you can more precisely define what is a noise and what is
program material. The noise profile can be equalized using a five-band
paragraphic EQ interface.
Waves ZNoise Users Guide
3
• Knee control – Here you adjust the angle of the knee to smooth or sharpen
reduction dynamics.
How Does Z-Noise Work?
Z-Noise, like other broadband noise reduction algorithms, is essentially a multi-
band expander that uses a noise profile to set the threshold within each band
according to the energy of noise analyzed in that band. When energy in a
specific band falls below the threshold, the input signal is presumed to be noise
or signal decaying into noise and the signal is attenuated in that frequency band.
Z-Noise employs the most recent psychoacoustic research and multilevel
decision algorithms to remove noise while preserving the sonic clarity of the
source. It performs much better than comparable DAW tools and as well as or
better than more expensive hardware solutions. Used wisely, Z-Noise reduces
noise while minimizing artifacts, and preserves the quality of the original
recording.
In the case of broadband noise reduction, noises are considered to be un-
correlated from the musical signal. Z-Noise will do a great job of removing tape
flutter or analog hiss, for example, but it will not be able to reduce background
voices or anything that might be interpreted as signal, such as birds, crickets,
music, etc.
The Z-Noise is a single-ended noise reduction algorithm that does not require an
encoded original recording. Instead, it learns or extracts a noise profile from the
audio signal and uses this noise profile to help it to distinguish noise from audio
data.
Z-Noise’s controls are similar to those of a dynamics processor. Those familiar
with a typical compressor/expander should achieve excellent results within a few
minutes of experimentation.
To install software and manage your licenses, you need to have a free Waves
account. Sign up at www.waves.com. With a Waves account you can keep track
of your products, renew your Waves Update Plan, participate in bonus programs,
and keep up to date with important information.
We suggest that you become familiar with the Waves Support pages:
www.waves.com/support. There are technical articles about installation,
troubleshooting, specifications, and more. Plus, you’ll find company contact
information and Waves Support news.
Tuotetiedot
| Merkki: | Waves |
| Kategoria: | Audio-ohjelmisto |
| Malli: | Z-Noise |
Tarvitsetko apua?
Jos tarvitset apua merkille Waves Z-Noise esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Audio-ohjelmisto Waves Käyttöohjeet
3 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
Audio-ohjelmisto Käyttöohjeet
- Audio-ohjelmisto Slate Digital
- Audio-ohjelmisto Native Instruments
- Audio-ohjelmisto Air
- Audio-ohjelmisto FabFilter
- Audio-ohjelmisto MAAT
- Audio-ohjelmisto Tek'it Audio
- Audio-ohjelmisto Audio Modeling
- Audio-ohjelmisto Kuassa
- Audio-ohjelmisto MeldaProduction
- Audio-ohjelmisto Dear Reality
- Audio-ohjelmisto Nomad
- Audio-ohjelmisto Bome
- Audio-ohjelmisto Minimal Audio
- Audio-ohjelmisto MIA Laboratories
- Audio-ohjelmisto Modalics
Viimeisimmät Audio-ohjelmisto Käyttöohjeet
3 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
2 Huhtikuuta 2025
30 Maaliskuuta 2025
12 Maaliskuuta 2025
29 Tammikuuta 2025
29 Tammikuuta 2025
29 Tammikuuta 2025