Totolink SW24DM Käyttöohje

Totolink Kytkin SW24DM

Lue alta 📖 käyttöohje suomeksi merkille Totolink SW24DM (1 sivua) kategoriassa Kytkin. Tämä opas oli hyödyllinen 7 henkilölle ja sai 5.0 tähden keskimäärin 4 käyttäjältä

Sivu 1/1
Checking Package Contents
Before Installation
1* 16/24 ports Ethernet Switch
1* Power Cord
1* Quick Installation Guide
2* Mounting Brackets and the fittings
Quick Installation Guide
Ethernet Switch
Suitable for: SG16,SG16D,SG24,SG24D
SW16,SW16D,SW16DM,
SW24,SW24D,SW24DM
For more information, please go to www.totolink.net
Information in this document is subject to change without prior notice.
Copyright
TOTOLINK., All rights reserved.
Appearance
(Take SW24 & SG24 for Example)
LED Indicators
Working Modes
(Only for SG24
&SG24D)
Link/Act
(1~16 or 1~24)
POWER
LED Indicator Description
The indicator lights green when powered on
The corresponding indicator lights green when connected
to other device, flashes green during data transfer
Flow Control ON
Flow Control OFFM1
M2
23/24 Ports Aggregation based on MAC sourcesM3
1-22 Port Isolation 23~24 Port Uplink, M4
Note: M3 mode must be used with TOTOLINK products
Hardware Installation Refer to the application scene graph below
Notice
1. The switch should be used indoor only.
2. Use the Power cord comes with the switch.
3. Set the device on a flat surface strong enough to support the entire weight
of the device with all fittings.
4. Dont place heavy objects on the switch.
Use Ethernet cable to connect router to Switch (LAN port to LAN port)
Use Ethernet cable to connect PC or Laptop’s RJ45 port to Switch
Plug one end of the power cord into switch’s AC power jack and then
other end to wall socket.
Ethernet Switch Router

Tuotetiedot

Merkki: Totolink
Kategoria: Kytkin
Malli: SW24DM

Tarvitsetko apua?

Jos tarvitset apua merkille Totolink SW24DM esitä kysymys alla ja muut käyttäjät vastaavat sinulle