StarTech.com M2-HDD-DUPLICATOR-N1 Käyttöohje
StarTech.com
Ei luokiteltu
M2-HDD-DUPLICATOR-N1
Lue alta 📖 käyttöohje suomeksi merkille StarTech.com M2-HDD-DUPLICATOR-N1 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 24 henkilölle ja sai 4.6 tähden keskimäärin 12.5 käyttäjältä
Sivu 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 14, 2024
Product ID
M2-HDD-DUPLICATOR-N1
Top
Rear
1 to 1 M.2 NVMe Drive Duplicator Dock
Component Function
1 Target Drive Bay • Insert the Target M.2 NVMe Drive to Copy to
2 Source Drive Bay • Insert the Source M.2 NVMe Drive to Copy from
3 Mode Selector Switch
• Press and Hold to change between PC or
Duplicator Mode
4 Mode LED Indicators
• Solid Green: PC Mode
• Solid Blue: Duplicator Mode
5 Progress LED Indicators
• Indicates progress from 25% to 100% during the
Duplication process
6 Drive LEDs
• Solid Blue: Indicates the M.2 Drive is detected
• Flashing Red: There is an error reading the M.2
Drive or the M.2 Drive was removed during
duplication
• Solid Purple: Indicates the Target M.2 Drive is
too small to duplicate to
7 Start Button
• Starts the Drive Duplication process
• See Operation section for more information
8 USB-C Host Connection
• Connect the Drive Duplicator Dock to an
available USB-C Port on a Host Computer
• Only required for PC Mode
9 DC Power Input • Connect the included Universal Power Adapter
10 Power Switch • Turn the M.2 Drive Duplicator Dock On or O
Requirements
For the latest product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/M2-HDD-DUPLICATOR-N1
Package Contents
• M.2 Drive Duplicator Dock x 1
• 3ft (1m) USB-C to USB-C Cable x 1
• 3ft (1m) USB-A to USB-C Cable x 1
• Universal Power Adapter (NA/UE/UK/ANZ) x 1
• Quick-Start Guide x 1
1
2
3 4 6
5
7
8
9
10
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Copy a Drive
1. Press the Mode Selector Button until the Duplicator Mode LED is Solid Blue.
2. Ensure the Source and Target Drives are in the correct Drive Bays.
3. Press and Hold the Start Button until the Progress LED Indicators begin to ash.
Immediately release and press the Start Button once more. The 25% LED will begin
to ash to indicate the duplication process is in progress.
Warning! Do not disconnect either drive or interrupt the process until the duplication
process has completed. Doing so may result in damage to the drive or lost data.
Note: As each 25% segment of the duplication process nishes, the corresponding
LED will turn solid, while the subsequent LED will begin to ash
4. When All Progress LED Indicators are no longer ashing and have become solid,
the duplication process is complete.
Installation
Power the Drive Duplicator Dock
1. Connect the Universal Power Adapter to the appropriate Regional Power Tip.
2. Connect the Universal Power Adapter to the DC Power Input, located on the rear of
the M.2 Drive Duplicator Dock.
3. Toggle the Power Switch , located on the rear of the M.2 Drive Duplicator Dock, to
the ON position.
Note: The M.2 Drive Duplicator Dock should be powered o before removing or adding
drives to the Target/Source Drive Bays.
Operation
Warning! M.2 Drives can become hot during duplication or prolonged data transfer
sessions. Avoid touching the M.2 Drives immediately after use to prevent burns or
damage. Allow the drives to cool down before removing/handling.
Connect to a Computer
1. Insert a M.2 NVMe Drive into the Source and/or Target Drive Bay.
2. Press the Mode Selector Button until the PC Mode LED is Solid Green.
3. Connect the included USB-C Cable from the USB-C Port, located on the rear of the
Drive Duplicator Dock, to an available USB-C Port on the Host Computer.
4. The Host Computer will automatically detect and install the required Drivers.
Tuotetiedot
| Merkki: | StarTech.com |
| Kategoria: | Ei luokiteltu |
| Malli: | M2-HDD-DUPLICATOR-N1 |
Tarvitsetko apua?
Jos tarvitset apua merkille StarTech.com M2-HDD-DUPLICATOR-N1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu StarTech.com Käyttöohjeet
18 Maaliskuuta 2025
18 Maaliskuuta 2025
20 Tammikuuta 2025
20 Tammikuuta 2025
1 Tammikuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
31 Joulukuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Hyundai
- Ei luokiteltu Becken
- Ei luokiteltu Bryton
- Ei luokiteltu WHALE
- Ei luokiteltu Mikrotik
- Ei luokiteltu V-Tone
- Ei luokiteltu Atdec
- Ei luokiteltu Grundig
- Ei luokiteltu Medion
- Ei luokiteltu Florabest
- Ei luokiteltu EtherWAN
- Ei luokiteltu Telmax
- Ei luokiteltu GoPro
- Ei luokiteltu Red Digital Cinema
- Ei luokiteltu Electrolux
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025