StarTech.com C2-ETHERNET-EXTENDER Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille StarTech.com C2-ETHERNET-EXTENDER (3 sivua) kategoriassa Wifi-toistin. Tämä opas oli hyödyllinen 41 henkilölle ja sai 4.0 tähden keskimäärin 2 käyttäjältä

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 11, 2024

Product ID

C2-ETHERNET-EXTENDER

Front View

ComponentFunction

1ON/OFF Position• Sets a specied DIP Switch ON or OFF

2DIP Switches

• Select the desired change for (1) Link Fault Pass-Through

(LFPT), (2) Link Speed, or (3) Local/Remote mode

Note: Keep the DIP Switch 4 in the OFF position at all times to

prevent undesired behavior.

LFPT Note: If a link between two units is lost, one unit may

continue to send packets assuming the link is up, potentially

leading to data loss. LFPT minimizes this risk by forcing a link

down state upon link failure.

3LAN Port

• Connects the Local unit to the Local Network or Host

Device/Computer via RJ45 UTP Cable

• Connects the Remote unit to a Remote Network or

IP-Based Device via RJ45 UTP Cable

4LED Indicators

• Indicate the status of Local/Remote, Power, Link Status,

Link Speed, and LFPT

5LINE Port

• Connects the Local and Remote units to each other using

RJ45 or RJ11UTP Cable

6

DC Power Port

(At the Back)

• Connect to a Power Source using the included Power

Adapter

• Recommended 12V and 1A

• Type M barrel plug: Ø 5.5x2.1x9.5mm

10/100 Base-TX Ethernet Extender Kit - Extend up to 2,624ft (800m)

LED Indicators

LEDColorONOFF

LocalGreenLocal Mode is ONAuto Mode

PWRGreenUnit is receiving powerUnit is not receiving power

LAN LinkGreenLAN Link UpLAN Link is Down

100MGreen

Local to Remote Link is

operating at 100Mbps

Local to Remote unit Link

is operating at 10Mbps or

is Down

LFPTGreen

LFPT function is ON,

and a LAN Link Fault has

occurred

LFPT function is OFF or

LFPT function is ON, and

no LAN Link Fault has

occurred

10MGreen

Local to Remote Link is

operating at 10Mbps

Local to Remote unit Link

is operating at 100Mbps or

is Down

Package Contents

• Ethernet Extender x 2

• Power Adapter x 2

• Mounting Bracket x 2

• Mounting Screws x 4

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/C2-ETHERNET-EXTENDER

• RJ45 terminated UTP/STP Cat5e (or better) Ethernet cable (sold separately)

• Phillips head screwdriver

1

3

2

54

*Product may vary from image

Tuotetiedot