StarTech.com 2M2-REMOVABLE-PCIE Käyttöohje

StarTech.com Ei luokiteltu 2M2-REMOVABLE-PCIE

Lue alta 📖 käyttöohje suomeksi merkille StarTech.com 2M2-REMOVABLE-PCIE (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 36 henkilölle ja sai 4.6 tähden keskimäärin 18.5 käyttäjältä

Sivu 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 3, 2024
Product ID
2M2-REMOVABLE-PCIE
Component Function
1Full-Prole Bracket
Secure the to the M.2 NVMe SSD Backplane
Computer Case
Hosts the for the M.2 Drives M.2 NVMe SSD
Backplane
3Active Cooling Fans Vents air away from the M.2 NVMe Drives
4PCIe p1-x8 Connector
Connect the to a M.2 NVMe SSD Backplane PCIe
Slot Computer in the
5Key Lock for Drive Tray
Use the included to Lock or Unlock the Key M.2
Drive Trays M.2 NVMe SSD Backplane from the
6Drive LED Indicator
Red: Connected Drive is Not Supported
Green: Connected Drive is Supported
Yellow: Flashes to indicate Drive Activity
Dual-Bay M.2 NVMe SSD Backplane for PCIe p1-x8 Slot with Bifurcation
Product Information
For the latest drivers/software, technical specications, and declarations of
conformance, please visit: www.StarTech.com/2M2-REMOVABLE-PCIE
Package Contents
Dual-Bay M.2 NVMe SSD Backplane x 1
Removable M.2 Drive Tray x 2
M.2 Drive Mounting Screw x 2
Set of Keys x 1
Quick-Start Guide x 1
Requirements
Computer x 1
PCIe p1-x8 or p1-x16 Slot with Bifurcation support
PCI Express M.2 SSD x 2
Phillips Head Screwdriver x 1
Installation
Warning: PCIe Cards can be damaged by static electricity. Ensure that the Installer
is properly grounded before they open the Computer Case or touch the M.2 NVMe
SSD Backplane. The Installer should wear an Anti-Static Strap when installing any
computer component. If an Anti-Static Strap is not available, discharge any built-up
static electricity by touching a large Grounded Metal Surface for several seconds.
Only handle the M.2 NVMe SSD Backplane by its edges and do not touch the gold
connectors.
Note: Consult the documentation that came with the Computer/Motherboard for
details regarding how to enable and congure PCIe Bifurcation.
Install the M.2 Storage Drives
1. Remove the from the Drive Tray M.2 NVMe SSD Backplane
2. Remove the from the by pressing the two Heat Sink Cover Removable Drive Tray
Plastic Heat Sink Latching Locks, located near the back of the tray, towards each
other.
3. Place the next to the and note the that Drive Drive Tray Adjustable Stando Holes
match the length of the .Drive
4. Remove the Adjustable by pressing the side of the Adjustable Stando and Stando
sliding it towards the front of the tray.
5. Install the in the that matches the length of the Stando Adjustable Stando Holes
Drive.
6. Insert the into the Drive Removable Drive Tray’s M.2 Connector
Note: The M.2 Connector on the Drive is M-Keyed so that it only ts M-Keyed NVMe
M.2 Storage Devices
7. Gently slide the into the of the , and M.2 Drive Connector M.2 Connector Drive Tray
press the down toward the adapter until the is properly seated.Drive Drive
4
3
1
2
2
5
6
5
6

Tuotetiedot

Merkki: StarTech.com
Kategoria: Ei luokiteltu
Malli: 2M2-REMOVABLE-PCIE

Tarvitsetko apua?

Jos tarvitset apua merkille StarTech.com 2M2-REMOVABLE-PCIE esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu StarTech.com Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet