Sanwa CD5001 Käyttöohje
Sanwa
Yleismittari
CD5001
Lue alta 📖 käyttöohje suomeksi merkille Sanwa CD5001 (32 sivua) kategoriassa Yleismittari. Tämä opas oli hyödyllinen 29 henkilölle ja sai 4.5 tähden keskimäärin 15 käyttäjältä
Sivu 1/32
CD5001
デジタルマルチメータ
DIGITAL MULTIMETER
取扱説明書
INSTRUCTION MANUAL
【
1
】
SAFETY PRECAUTIONS: Before use, read the following safety precautions
1-1 Explanation of Warning Symbols 30
1-2 Warning Messages for Safe Use 30
1-3 Maximum Overload Protection Input 31
【2】 APPLICATIONS AND FEATURES
2-1 Applications 32
2-2 Features 32
【
3
】
NAMES OF COMPONENT UNITS
3-1 Main Unit and Test Leads 33
3-2 Display 34
【4】 DESCRIPTION OF FUNCTIONS
4-1 Rotary Switch 35
4-2 Data Hold Function:
DATA HOLD
Button 35
4-3 Auto Hold Function:
AUTO HOLD
Button 35
4-4 Relative Measurement Function:
REL
Button 36
4-5 Range Hold Function:
RANGE HOLD
Button 36
4-6 Backlight Function: Button 36
4-7 Auto Power OFF Function 37
4-8 Low Battery Indication 37
4-9 Voltage Warning Indicator and Buzzer 37
4-10 Buzzer Deactivation Function 37
4-11 AC Detection Method 38
4-12 Crest Factor 38
【5】 MEASUREMENT PROCEDURE
5-1 Start-up Inspection 39
5-2 Automatic Voltage Detection Measurement (
AUTO V
) 41
5-3 AC Voltage Measurement (
ACV
) 42
5-4 DC Voltage Measurement (
DCV
) 43
5-5 Frequency Measurement (
Hz
) 44
5-6 Continuity Check ( ) 45
5-7 Resistance Measurement ( ) 46
5-8 Capacitance Measurement ( ) 47
5-9 Voltage Detection (
EF
: Electric Field Detection) 48
【6】 MAINTENANCE
6-1 Maintenance and Inspection 49
6-2 Calibration 49
6-3 Cleaning and Storage 49
6-4 Battery Replacement 50
【7】 AFTER-SALE SERVICE
7-1 Warranty and Provision 51
7-2 Repair 51
7-3 SANWA Website
52
【8】 SPECIFICATIONS
8-1 General Specications 53
8-2 Optional Accessories 54
8-3 Measuring Range and Accuracy 54
CONTENTS
………………………………
………………………………
…………………………
……………………………………………………
…………………………………………………………
………………………………………
……………………………………………………………
……………………………………………………
……………………
……………………
………………
………………
…………………………………
……………………………………
…………………………………………
………………………
…………………………………
…………………………………………
……………………………………………………
……………………………………………
……
………………………………
………………………………
…………………………………
…………………………………………
…………………………………
………………………………
……………
…………………………………
………………………………………………………
…………………………………………
……………………………………………
…………………………………………
……………………………………………………………
…………………………………………………
…………………………………………
…………………………………………
………………………………
【1】
SAFETY PRECAUTIONS: Before use, read the following safety precautions
This instruction manual explains how to use your CD5001 digital
multimeter safely. Before use, please read this manual thoroughly
to ensure correct and safe use. After reading it, keep it together
with the product for reference to it when necessary.
Using this product in ways not specied in this manual may damage
its protection function.
The instructions given under the headings of “ WARNING” and
“ CAUTION” must be followed to prevent accidental burn and
electrical shock.
1-1 Explanation of Warning Symbols
The meaning of the symbols used in this manual and attached to the
product is as follows.
: Very important instruction for safe use.
・The warning messages are intended to prevent accidents to
operating personnel such as burn and electric shock.
・The caution messages are intended to prevent incorrect
handling which may damage the product.
Symbols attached to the product
: Refer to the instruction manual before use.
: High voltage. Do not touch.
: Double insulation or reinforced insulation
: Ground : Resistance : Continuity buzzer
: Capacitance : Backlight : EFantenna
1-2 Warning Messages for Safe Use
1
The following instructions are intended to prevent personal injury
such as burn and electric shock. Be sure to follow them when
using the instrument.
1.
This instrument is a digital multimeter for metering low voltages.
Never use it on electric circuits that exceed 1000 V.
2. Never apply an input signal exceeding the maximum rating
input value (see section 1-3).
3. Never use the instrument for measuring the line connected
with equipment (i.e., motors) that generates induced or surge
voltage since it may exceed the maximum allowable voltage.
WARNING
4. Never use the instrument if it is damaged or broken; the
same applies to the test leads.
5.
Never use the instrument with the case or battery lid removed.
6. During measurement, do not hold the test pin side of the
ange of the test leads.
7. Do not turn the rotary switch to change the function during
measurement.
8. Be sure to check the rotary switch position, measurement
range, and measurement terminals for each measurement.
9. Never use the instrument when it is wet or with wet hands.
10. Never attempt to repair or modify the product, except for
battery and fuse replacement.
11. Be sure to perform start-up inspection and annual inspection.
12. This instrument is for indoor use only.
13. When measuring equipment containing a hazardous charged
part, follow your local and national safety standards.
14. Do not use the instrument in a method other than specied.
Otherwise, the protection function may be spoiled.
–
30
–
Tuotetiedot
| Merkki: | Sanwa |
| Kategoria: | Yleismittari |
| Malli: | CD5001 |
Tarvitsetko apua?
Jos tarvitset apua merkille Sanwa CD5001 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Yleismittari Sanwa Käyttöohjeet
8 Joulukuuta 2024
Yleismittari Käyttöohjeet
- Yleismittari Metrix
- Yleismittari Klein Tools
- Yleismittari Extech
- Yleismittari PCE Instruments
- Yleismittari Voltcraft
- Yleismittari Bearware
- Yleismittari EMOS
- Yleismittari Proline
- Yleismittari Megger
- Yleismittari Noyafa
- Yleismittari Velleman
- Yleismittari Ideal
- Yleismittari Fluke
- Yleismittari Testec
- Yleismittari IWH
Viimeisimmät Yleismittari Käyttöohjeet
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
28 Maaliskuuta 2025
26 Maaliskuuta 2025
14 Maaliskuuta 2025