Pyle PDWR40B Käyttöohje

Sivut 2 Engels Kaiutin

Lue käyttöohje merkille Pyle PDWR40B ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 50 henkilölle. Kysyttävää mallista? Esitä kysymys

www.PyleUSA.com
Featu
Installation
MOUNTING THE BRACKET MOUNTING
1. Remove the bracket knobs and the bracket
from the speaker.
2. Hold the bracket up to the mounting surface.
"" can be mounted either horizontallyPYLE
wire ts through the large, circular wire hole in
the bracket. Align the bracket to be square with
the surrounding. (Use a level for accuracy)
3. Mark the locations of the three shaped screw holes.
Use all of the holes.
4. Drill pilot holes into the mounting surface.
5. Gently pull the speaker wire through the wire hole
in the center of the mounting bracket.
Align the bracket so that the holes all line up.
6. Use your hardware to attach the bracket to the mounting surface.
Visit Our Website
SCAN
PyleUS
USER GUIDE
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
•Excellent for use on Boats Marinas, Decks,
Patios, Poolside, Outdoors, Etc.
•Completely Water Proof
•Each PDWR40B Features:
5 1/4” Aluminum Injection Cone Woofer•
40 OZ. Magnet Structure•
1”High Compliance Myiar Tweeter•
Capacitor Crossover Network•
Bass Reex Vent for added Bass Response•
•Heavy Duty ABS Constrution
•Quick Connect/Disconnect Speaker
Terminals
•Unique Spring Loaded Mounting System
•Removable Rustproof Mesh Grills
•Power: 200 Watts RMS/400 Watts Peak
•Frequency Response: 40-22K HZ
•Impedance: 4 Ohms
•Dimensions: 6.25”(W) x 9.25”(H) x 5.75”(D)

Arvostele tämä ohje

Tuotetiedot

Merkki: Pyle
Kategoria: Kaiutin
Malli: PDWR40B

Tarvitsetko apua?

Jos tarvitset apua merkille Pyle PDWR40B esitä kysymys alla ja muut käyttäjät vastaavat sinulle