PCE Instruments PCE-HPT 1 Käyttöohje
PCE Instruments
Lämpömittari
PCE-HPT 1
Lue alta 📖 käyttöohje suomeksi merkille PCE Instruments PCE-HPT 1 (14 sivua) kategoriassa Lämpömittari. Tämä opas oli hyödyllinen 24 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/14
Manual
Thermometer
PCE-HPT 1
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@industrial-needs.com
CONTENTS
TITLE PAGE
1. Introduction………………………………………………………………….……………. 1
2. Specifications……………………………………………………………………………... 1
3. Symbol Definition and Button Location………......................................................
2
4. Operation Instructions……………………….…………………..................................
3
4.1 Power-Up……………...........................................................................................3
4.2 Connection the Temperature Probe………............................ .............................. 3
4.3 Selecting the Temperature Scale……………..…………………………………….. 3
4.4 Data-Hold Operation…………………………………………………………………..3
4.5 Back light Operation………………………………………………………………….. 3
4.6 Relative Operation……………………………………………………………............ 3
4.7 Record Operation…………………………………………………………................. 3
4.8 MAX/MIN Operation………………………….……………………………................ 3
4.9 Auto Power Off………………………………………………………………………… 4
4.10 Low Battery Condition………………………………………..... ………………….. 4
5. Temperature Measurement……………………………………....... ………………….. 4
6. Setting the Time…………………………………………………………........................ 5
7. Changing the Logging Interval………………………………………………………… 5
8. Clearing Memory…………………………………………………………………………. 5
9. Temperature Meter Calibration Setup ……….……………………………………….. 6
10. Communicating with a PC…………………………………………………………….. 7
Testlink PCE-HPT 1 Software…………………………………………………………… 7
11. Power Preparation…………………………………………………………………….. 12
12. Maintenance .…….……………………………………………………………………. 12
13. Temperature Probe.…………………………………………………………….......... 12
PCE-HPT 1 THERMOMETER
1
1. INSTRUCTION
This instrument is a digital thermometer for use with platinum-type temperature sensor.
Temperature indication follows IEC751 temperature table for PT-type sensor.
2. SPECIFICATIONS
Numerical Display: 5 digital liquid crystal displays
Measurement Range: -100°C ~ 400°C; -148°F ~ 752°F
Resolution: 0.01°C; 0.02°F;
Sensor types:
Platinum resistance temperature sensor for pt-100 4 wires.
ALPHA=0.00385
Environmental:
Operating Temperature and Humidity:
0°C ~50°C (32°F ~ 122°F) ; 0 ~ 80% RH
Storage Temperature:
-10°C to 60°C (14°F ~ 140°F); 0 ~ 80% RH
Altitude up to 2000 meters.
Accuracy: at ( 23 ± 5°C )
Range Accuracy
-100°C ~ 400°C ±(0.05% reading + 0.1°C)
-148°F ~ 752°F ±(0.05% reading + 0.2°F)
Temperature Coefficient:
For ambient temperatures from 0°C ~ 18°C and 28°C ~ 50°C, for each °C ambient below 18°C or
above 28°C add the following tolerance into the accuracy spec.
0.005% of reading + 0.01°C ( 0.005% of reading + 0.02°F )
Note:
The basic accuracy Specification does not include the error of the probe please refer to the
probe accuracy specification for additional details.
Sample Rate: 2 times per second
Dimension: 185 x 65 x 36 mm(meter only)
Weight: 360g Approx.
Power requirement:
9V Battery;
AC adapter: 9V DC(7~10V Max.)/20mA Min (Plug Diameter: 3.5mmx1.35mm)
Battery Life: Approx. 100hours
Standard Accessory:
Pt-100 Probe(class A), Instruction manual, 9V Battery, windows software, carrying case, USB
cable.
Optional Accessories: AC adapter, RS-232 Cable.
PCE-HPT 1 THERMOMETER
2
3. SYMBOL DEFINITION & BUTTON LOCATION
: The Battery is not sufficient for proper operation.
MIN : The Minimum value is now being displayed
MAX : The Maximum value is now being displayed
HOLD : This indicates that the display data is being hold.
: This indicates Auto Power Off is enabled.
REC : Readings are being logged.
REL : The reading is now under Relative Mode.
°C °F : Centigrade and Fahrenheit indication.
-
: This indicates that the minus temperature is sensed.
h:m
: hours; minute
○
1 Pt type temperature sensor connector ○
7 HOLD button
○
2 LCD display ○
8 °C , °F control button
○
3 Power ON/OFF and Back light button ○
9 PC Interface
○
4 Relative readout button ○
10 External DC 9V power supply jack
○
5 REC button ○
11 Tilt stand
○
6 MAX MIN control button ○
12 Battery Compartment
PCE-HPT 1 THERMOMETER
3
4. OPERATION INSTRUCTIONS
4.1 Power-Up
Press the “ ” key to turn ON the thermometer and Press and hold “ ” buttons for 3 seconds
to OFF.
4.2 Connection the Temperature Probe
For measurement, plug the temperature probe into the input connectors.
4.3 Selecting the Temperature Scale
When the meter was first power on, the default scale setting is set at Celsius (°C) scale. The user
may change it to Fahrenheit (°F) by pressing button and vice versa to Celsius and change
default scale.
4.4 Data-Hold Operation
The user may hold the present reading and keep it on the display by pressing the button.
When the hold data is no longer needed, one may release the data-hold operation by pressing
button again.
When the meter is under Data Hold operation, the , and button are disabled.
4.5 Back light Operation:
Press the button will turn back light on and Press it once again will turn off.
The meter will turn back light off if there is no push button for 30 seconds.
4.6 Relative Operation:
When one press the button, the meter will memorize the present reading and the difference
between the new reading and the memorized data will be shown on the display. Press the
button again to exit the Relative operation.
4.7 Record Operation:
Starting and Stopping Logging Setup, memory clear, and PC communications are inaccessible
during logging.
Set the logging interval. (See “Changing the Logging Interval.”)
Press button to start logging. The display shows “REC”.
Press button again to stop logging.
4.8 MAX/MIN Operation:
When one press the button the meter will enter the MAXMIN mode. Under this mode the
maximum value, minimum value is kept in the memory simultaneously and updated with every new
data.
When the MAX symbol is display, the Maximum is shown on the display.
Tuotetiedot
| Merkki: | PCE Instruments |
| Kategoria: | Lämpömittari |
| Malli: | PCE-HPT 1 |
Tarvitsetko apua?
Jos tarvitset apua merkille PCE Instruments PCE-HPT 1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lämpömittari PCE Instruments Käyttöohjeet
26 Joulukuuta 2024
26 Joulukuuta 2024
26 Joulukuuta 2024
22 Lokakuuta 2024
22 Lokakuuta 2024
22 Lokakuuta 2024
22 Lokakuuta 2024
22 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
Lämpömittari Käyttöohjeet
- Lämpömittari Hama
- Lämpömittari Philips
- Lämpömittari IFM
- Lämpömittari Arendo
- Lämpömittari Medel
- Lämpömittari La Crosse Technology
- Lämpömittari SereneLife
- Lämpömittari Sencor
- Lämpömittari EMOS
- Lämpömittari Optex
- Lämpömittari Bearware
- Lämpömittari Braun
- Lämpömittari Tristar
- Lämpömittari TFA
- Lämpömittari Owon
- Lämpömittari Neno
- Lämpömittari Miniland
- Lämpömittari Techno Line
- Lämpömittari Innoliving
- Lämpömittari TensCare
- Lämpömittari Omron
- Lämpömittari Uni-T
- Lämpömittari Testo
- Lämpömittari Vicks
- Lämpömittari Ebro
- Lämpömittari Senseca
- Lämpömittari Etekcity
- Lämpömittari Beurer
- Lämpömittari Scala
- Lämpömittari Proficare
- Lämpömittari Comelec
- Lämpömittari A&D Medical
- Lämpömittari AGM
- Lämpömittari Cresta
- Lämpömittari Cofoe
- Lämpömittari Unknown
- Lämpömittari Emga
- Lämpömittari Cresta Care
Viimeisimmät Lämpömittari Käyttöohjeet
8 Huhtikuuta 2025
7 Huhtikuuta 2025
3 Huhtikuuta 2025
3 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
1 Huhtikuuta 2025
29 Maaliskuuta 2025
29 Maaliskuuta 2025
27 Maaliskuuta 2025