NUVO Polaris 60/607 Käyttöohje

NUVO Lamppu Polaris 60/607

Lue alta 📖 käyttöohje suomeksi merkille NUVO Polaris 60/607 (2 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 28 henkilölle ja sai 5.0 tähden keskimäärin 14.5 käyttäjältä

Sivu 1/2
ASSEMBLY INSTRUCTION
SKU#60/607
NOTE: Please consult a qualied electrician if you are not certain of the installation.
CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
1. Attach the Mounting Strap to Outlet Box using the Outlet Box Screws provided.
2. Screw Loop into Nipple of the xture ( cant see in the drawing).
3. Screw o the Ring from the Screw Collar Loop on the Mounting Strap. Using a pair of pliers, twist open th e
4. Weave xture wires and ground wire up through Chain, through Ring, through Canopy, through the Nipple
on the Mounting Strap and put back into Outlet Box.
5. Connect wires white to white and black to black. Cover connections using Wire Connectors provided. Tie
ground wires from Outlet Box and from xture to the Ground Screw on the Mounting Strap.
6. Using a pair of pliers, twist open the link at the other end of the Chain. Hook the whole xture to the Screw
Collar Loop and close the link.
7. Place the Canopy over the Outlet Box. Tighten the Ring onto the Screw Collar Loop until the Canopy is held
rmly against the ceiling.
8. Screw the Tube into the Bushing. Unscrew the Socket Ring from Socket A. Insert the Glass Shade A over the
Socket A and retighten the Socket Ring until the Glass Shade A is held rmly to the xture.
9. Install the bulbs. (Not included)
10. Attach the Glass Shade B to the xture as drawn.
11. Turn on the power.
A Satco Product

Tuotetiedot

Merkki: NUVO
Kategoria: Lamppu
Malli: Polaris 60/607

Tarvitsetko apua?

Jos tarvitset apua merkille NUVO Polaris 60/607 esitä kysymys alla ja muut käyttäjät vastaavat sinulle