NUVO Bento 60/4091 Käyttöohje

NUVO Lamppu Bento 60/4091

Lue alta 📖 käyttöohje suomeksi merkille NUVO Bento 60/4091 (2 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 32 henkilölle ja sai 4.8 tähden keskimäärin 16.5 käyttäjältä

Sivu 1/2
ASSEMBLY INSTRUCTION
SKU#60/4 091
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting ring onto the outlet box by using provided 2 outlet box screws.
3. Place the nipples D through the canopy, place the washer A and washer B onto the nipple D, then using
4. Screw the nipple A into the bushing, screw nipple B into the tube A, screw the nipple C into the tube B.
5. Tie ground wire from outlet box and from xture to the ground screw on the mounting strap. Connect
white wire from xture to white wire (neutral wire) from supply circuit. Connect black wire from
xture to black wire (live wire) from supply circuit. Cover connections using provided wire
connectors.
6. ace the canopy to the outlet box by aligning the protruding mounting screws all the way through the Pl
canopy and tighten the xture using lock nuts provided until xture body is held rmly.
7. Unscrew the socket rings and covers from the sockets. Place the shades and socket covers over the
sockets, refasten the socket rings to secure them.
8. Install the bulb (Not included). Turn on the power.
A Satco Product

Tuotetiedot

Merkki: NUVO
Kategoria: Lamppu
Malli: Bento 60/4091

Tarvitsetko apua?

Jos tarvitset apua merkille NUVO Bento 60/4091 esitä kysymys alla ja muut käyttäjät vastaavat sinulle