Netgear Nighthawk MK93S Käyttöohje

Netgear Ei luokiteltu Nighthawk MK93S

Lue alta 📖 käyttöohje suomeksi merkille Netgear Nighthawk MK93S (25 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 8 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/25
User Manual
Nighthawk Tri-band Mesh WiFi 6E System
Models:
Tri-band Mesh WiFi 6E Router Model MR90
Tri-band Mesh WiFi 6E Satellite Model MS90
NETGEAR, Inc.
350 E. Plumeria DriveSeptember 2023
San Jose, CA 95134, USA202-12635-01
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while ying above 10,000 feet.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
Trademarks
Trademarks© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
2
Nighthawk Tri-band Mesh WiFi 6E
Contents
Chapter 1 Overview
What is WiFi 6E?....................................................................................9
Router hardware and LED overview...................................................9
Router hardware features................................................................9
Router LED behavior......................................................................10
Satellite hardware and LED overview..............................................11
Satellite hardware features...........................................................11
Satellite LED behavior...................................................................12
Router and satellite labels.................................................................12
Connect your router...........................................................................13
Place your satellite..............................................................................14
Sync your satellite with your router..................................................14
Chapter 2 Connect to the Network and Access the Router
Connect to the network.....................................................................17
Connect to the network using a wired connection....................17
Find and connect to the WiFi network........................................17
WiFi connection using WPS..........................................................17
Types of logins....................................................................................18
Use a web browser to access the router..........................................18
Automatic Internet Setup..............................................................18
Log in to the router........................................................................20
Install and manage your mesh system with the Nighthawk app...21
Change the language........................................................................21
Chapter 3 Specify Your Internet Settings
Use the Internet Setup Wizard..........................................................24
Manually set up the Internet connection.........................................24
Specify an Internet connection without a login..........................25
Specify an Internet connection that uses a login.......................26
Specify IPv6 Internet connections....................................................28
Requirements for entering IPv6 addresses.................................29
Use auto detect for an IPv6 Internet connection........................29
Set up an IPv6 6to4 tunnel Internet connection.........................30
Set up an IPv6 pass-through Internet connection......................32
Set up an IPv6 xed Internet connection....................................32
3
Set up an IPv6 DHCP Internet connection..................................34
Set up an IPv6 PPPoE Internet connection..................................35
Use auto cong for an IPv6 Internet connection........................37
Set up an IPv6 6rd Internet connection.......................................39
Manage the MTU size.........................................................................41
MTU concepts.................................................................................41
Change the MTU size....................................................................42
Chapter 4 Control Access to the Internet
Activate and manage NETGEAR Armor using the Nighthawk
app 44.......................................................................................................
Network access control list................................................................44
Enable the network access control list, set the access rule, and
allow or block connected devices...............................................45
Manage allowed devices currently not on the network............47
Manage blocked devices currently not on the network...........49
Use keywords to block Internet sites...............................................51
Block services from the Internet.......................................................52
Delete keywords from the blocked list............................................53
Prevent blocking on a trusted computer.........................................54
Schedule when to block Internet sites and services......................55
Set up security event email notications.........................................55
Chapter 5 Optimize Performance
Use Dynamic QoS to optimize Internet trafc management........59
Enable Dynamic QoS.....................................................................59
Enable or disable the automatic QoS database update...........60
Manually update the dynamic QoS database............................61
Improve network connections with Universal Plug and Play........61
Chapter 6 Manage WiFi Settings
Change the WiFi password or the WiFi security.............................65
Add a WiFi network............................................................................66
Set up a guest WiFi network.............................................................68
Use the WPS wizard for WiFi connections.......................................70
Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio.71
Hide your mesh network’s SSID........................................................72
Generate a new backhaul password................................................72
Enable or disable implicit beamforming.........................................73
Enable or disable AX WiFi.................................................................74
Change the region of operation.......................................................75
Change the CTS/RTS threshold or preamble mode for a radio....76
4
Nighthawk Tri-band Mesh WiFi 6E
Chapter 7 Manage Network Settings
View or change the WAN settings....................................................79
Set up a default DMZ server..............................................................80
Change the router’s device name....................................................81
Change the LAN IP address settings................................................82
Specify the IP addresses that the router assigns............................83
Disable the DHCP server feature in the router...............................85
Manage reserved LAN IP addresses................................................85
Reserve an IP address....................................................................86
Edit a reserved IP address............................................................87
Delete a reserved IP address entry..............................................87
Set the time zone manually...............................................................88
Change the NTP server......................................................................88
Set up the router as a WiFi access point..........................................89
Set up a bridge for a port group or VLAN tag group....................90
Set up a bridge for a port group..................................................91
Set up a bridge for a VLAN tag group........................................92
Set up an IPTV port........................................................................93
Manage custom static routes............................................................94
Set up a static route.......................................................................95
Edit a static route...........................................................................96
Delete a static route.......................................................................97
Manage Ethernet port aggregation to a LAN device....................97
Set up LAN port aggregation to a LAN device..........................98
View or change the router LAN port aggregation mode.........99
Chapter 8 Manage your Router and Satellite
Update the router and satellite rmware......................................102
Check for new rmware and update the router and satellite.102
Manually update the rmware...................................................103
Manually update satellite rmware...........................................103
Manually update router rmware..............................................104
Manage the rmware update settings......................................105
Change the admin password..........................................................106
Enable admin password reset........................................................107
Reset the admin password..............................................................108
Always use HTTPS to access the router.........................................109
View information about the router, the Internet port, and WiFi
settings 110...............................................................................................
Display the statistics of the Internet port.......................................111
Check the Internet connection status............................................112
View and manage logs of router activity.......................................113
View devices currently on the mesh network...............................114
5
Nighthawk Tri-band Mesh WiFi 6E
View the satellite status in the satellite web interface..................115
Monitor Internet trafc.....................................................................116
Set up and manage Dynamic DNS.................................................118
Set up a new Dynamic DNS account.........................................118
Use a DNS account that you already created...........................119
Change the Dynamic DNS settings...........................................120
Manage the router conguration le.............................................120
Back up the settings....................................................................121
Erase the settings on the router.................................................121
Restore the settings.....................................................................122
Return the router or satellite to its factory default settings.........123
Use the Reset button...................................................................123
Erase the settings on the router.................................................124
Connect to your router with Anywhere Access............................124
Chapter 9 Use OpenVPN to Access Your Network
About VPN connections..................................................................127
Enable OpenVPN service in the router..........................................128
Install OpenVPN software on a VPN client....................................129
Install OpenVPN software on a Windows-based computer....130
Install OpenVPN software on a Mac computer........................131
Install OpenVPN software on an iOS device............................132
Install OpenVPN software on an Android device....................133
LAN IP addressing in VPN networks..............................................134
Use VPN to access your Internet service at home........................135
Allow VPN client Internet access in the router.........................135
Block VPN client Internet access in the router.........................136
Chapter 10 Manage Port Forwarding and Port Triggering
Manage port forwarding to a local server.....................................139
Set up port forwarding to a local server...................................139
Add a custom port forwarding service.....................................140
Change a port forwarding service.............................................141
Delete a port forwarding entry..................................................142
Application example: Make a local web server public...........142
How the router implements the port forwarding rule.............143
Port triggering..................................................................................144
Add a port triggering service.....................................................144
Enable port triggering................................................................145
Application example: Port triggering for Internet Relay Chat.146
Chapter 11 Troubleshooting
Quick tips...........................................................................................149
Sequence to restart your network.............................................149
6
Nighthawk Tri-band Mesh WiFi 6E
1
Overview
The Tri-band Mesh WiFi 6E Router (model MR90) connects to your modem or gateway.
The Tri-band Mesh WiFi 6E Satellite (model MS90) connects to the Tri-band Mesh WiFi
6E Router (model MR90) and extends the WiFi signal throughout your home.
This manual describes how to manage your Tri-band Mesh WiFi 6E router and satellite
from your router web interface.
NOTE: You can manage your satellite from the router web interface.
This chapter contains the following sections:
• What is WiFi 6E?
• Router hardware and LED overview
• Satellite hardware and LED overview
• Router and satellite labels
• Connect your router
• Place your satellite
• Sync your satellite with your router
For more information about the topics covered in this manual, visit the support website
at https://www.netgear.com/support/.
NOTE: This manual refers to the Tri-band Mesh WiFi 6E Router (model MR90)
as the , and Tri-band Mesh WiFi 6E Satellite (model MS90) as the .router satellite
8
What is WiFi 6E?
WiFi 6E builds on the existing WiFi 6 (802.11ax) standard. WiFi 6E offers all of the
cutting-edge features of WiFi 6 and allows access to a new 6 GHz wireless band. This
combination of WiFi 6 technology and access to a brand new, empty WiFi band exclusive
to WiFi 6E devices makes WiFi 6E one of the most important developments in wireless
technology.
•More high-bandwidth channels: WiFi 6E expands on the spectrum and bandwidth
improvements of WiFi 6 with the addition of a 6 GHz band. This wireless band is
much wider than the 2.4 GHz and 5 GHz bands and can support up to fourteen
80 MHz channels or seven 160 MHz channels. This means more capacity for
high-bandwidth activities like 4k and 8k gaming, virtual reality applications, and
video conferencing.
•Less interference and network congestion: The 6 GHz wireless band is newly
certied and is exclusive to devices that support WiFi 6E. This means that on 6 GHz,
the WiFi network does not need to slow down to accommodate legacy devices.
Fewer devices, more spectrum, and more bandwidth means less interference and
network congestion. WiFi 6E devices can support the most bandwidth-heavy,
low-latency applications without competing for bandwidth.
•Improved security: Wi-Fi Protected Access (WPA) 3 is mandatory for all Wi-Fi 6
Certied devices operating in 6 GHz. WPA3 is the latest Wi-Fi Alliance security
certication. WPA3 provides the latest in security and authentication protocols. As
a result, 6 GHz WiFi trafc is more secure than ever and 6 GHz networks are more
difcult to hack.
To make use of the 6 GHz band, the router and its WiFi clients must support WiFi 6E.
NOTE: The router can let devices that support WiFi 6E connect to its 6 GHz
radio. Devices that do not support WiFi 6E cannot connect to the 6 GHz radio
but connect to the 2.4 GHz radio or 5 GHz radio.can
Router hardware and LED overview
The following sections are an overview of the router hardware features and LED behavior.
Router hardware features
The following gure shows the router hardware features.
User Manual9Overview
Nighthawk Tri-band Mesh WiFi 6E
Figure 1. Router front and back views
1. Router LED
2. Sync button
3. Reset button
4. Ethernet ports
5. Internet port
6. Power connector
Router LED behavior
The following table describes the LED behavior for the LED that is on the front of the
router.
Table 1. Router LED behavior
DescriptionLED color
The router LED blinks white for one of the following reasons:
•You connected the power adapter to the router. Now the router is booting and
attempting to sync with the satellite.
•You pressed the button and the router is attempting to sync with the satellite.Sync
•You pressed the button and the router is resetting to its factory default settings.Reset
Blinking white
The router nished booting, is connected to the Internet, and is working normally. The
LED stays lit solid blue when the satellite is working normally.
Solid blue
The router is unable to connect to the Internet.Solid amber
The router's rmware is corrupted.Blinking amber
-
User Manual10Overview
Nighthawk Tri-band Mesh WiFi 6E
Satellite hardware and LED overview
The following sections are an overview of the satellite hardware features and LED
behavior.
Satellite hardware features
The following gures shows the satellite hardware features.
Figure 2. Satellite front and back views
1. Satellite LED
2. Sync button
3. Reset button
4. Ethernet ports
5. Power connector
User Manual11Overview
Nighthawk Tri-band Mesh WiFi 6E
The satellite label also displays the WiFi network name and password, the satellite’s
MAC address, and the satellite’s serial number. The following is an example of what the
satellite label might look like:
Figure 4. Satellite label
Connect your router
Power on your router and connect it to a modem.
Figure 5. Connect your router
To connect your router:
1. Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3. Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
User Manual13Overview
Nighthawk Tri-band Mesh WiFi 6E
Connect to the network
You can connect to the router’s network through a wired or WiFi connection. If you set
up your computer to use a static IP address, change the settings so that it uses Dynamic
Host Conguration Protocol (DHCP).
Connect to the network using a wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Router LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to the Ethernet port on the router.
Your computer connects to the local area network (LAN).
Find and connect to the WiFi network
To nd and select the WiFi network:
1. Make sure that the router is receiving power (its Router LED is lit).
2. On your computer or WiFi device, nd and select the WiFi network.
The WiFi network name is on the router label.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your device connects to the WiFi network.
WiFi connection using WPS
You can connect your WPS-enabled device to the router’s WiFi network with Wi-Fi
Protected Setup (WPS) or you can nd and select the WiFi network.
User Manual17Connect to the Network and
Access the Router
Nighthawk Tri-band Mesh WiFi 6E
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Router LED is lit).
2. Check the WPS instructions for your WPS-enabled device.
3. Press the button on the router.Sync
4. Within two minutes, on your WPS-enabled device, press its button or followWPS
its instructions for WPS connections.
Your WPS-enabled device connects to the WiFi network.
Types of logins
Separate types of logins serve different purposes. It is important that you understand
the differences so that you know which login to use when.
Several types of logins are associated with the router:
•ISP login. The login that your Internet service provider (ISP) gave you logs you in to
your Internet service. Your ISP gave you this login information in a letter or some
other way. If you cannot nd this login information, contact your ISP.
•WiFi network key, WiFi passphrase, or WiFi password. Your router is preset with
a unique WiFi network name (SSID) and password for WiFi access. This information
is on the router label.
•NETGEAR account login. The free NETGEAR account that you need to register your
router and manage your subscriptions. If you do not own a NETGEAR account, you
can create one.
•Router login. The router login password that you need to log in to the router with
the admin user name when you use a web browser to access the router.
Use a web browser to access the router
When you connect to the network (either with WiFi or with an Ethernet cable), you can
use a web browser to access the router to view or change its settings. When you access
the router, the software automatically checks to see if your router can connect to your
Internet service.
Automatic Internet Setup
You can set up your router automatically, or you can use a web browser to access the
router and set up your router manually. Before you start the setup process, get your ISP
User Manual18Connect to the Network and
Access the Router
Nighthawk Tri-band Mesh WiFi 6E
information and make sure that the computers and devices in the network are using
the settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
•The ISP conguration information for your DSL account
•ISP login name and password
•Fixed or static IP address setting (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
The NETGEAR installation assistant runs on any device with a web browser. Installation
and basic setup takes about 15 minutes to complete.
To automatically set up your router:
1. Make sure that the router is powered on.
2. Make sure that your computer or mobile device is connected to the router with an
Ethernet cable (wired) or over WiFi with the preset security settings listed on the
label.
NOTE: If you want to change the router’s WiFi settings, use a wired
connection to avoid being disconnected when the new WiFi settings take
effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
•The rst time you set up the Internet connection for your router, the browser goes
to and the Conguring the Internet Connectionhttp://www.routerlogin.net
page displays.
• http://www.routerlogin.netIf you already set up the Internet connection, enter
in the address eld for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the NETGEAR installation assistant, do the following:
User Manual19Connect to the Network and
Access the Router
Nighthawk Tri-band Mesh WiFi 6E
•Make sure that the computer is connected to an Ethernet port on the router or
satellite or to the mesh WiFi network.
•Make sure that the router is receiving power and that its Router LED is lit.
•Close and reopen the browser or clear the browser cache.
• http://www.routerlogin.netBrowse to .
•If the computer is set to a static or xed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed
everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read Troubleshooting on page 148.
If problems persist, register your NETGEAR product and contact NETGEAR
Technical Support.
Log in to the router
When you rst connect to your router and launch a web browser, the browser
automatically displays the router web interface. If you want to view or change settings
for the router later, you can use a browser to log in to the router web interface.
To log in to the router:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter .http://www.routerlogin.net
NOTE: http://www.routerlogin.comYou can also enter or
http://192.168.1.1. The procedures in this manual use
http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
User Manual20Connect to the Network and
Access the Router
Nighthawk Tri-band Mesh WiFi 6E

Tuotetiedot

Merkki: Netgear
Kategoria: Ei luokiteltu
Malli: Nighthawk MK93S

Tarvitsetko apua?

Jos tarvitset apua merkille Netgear Nighthawk MK93S esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Ei luokiteltu Netgear Käyttöohjeet

Netgear

Netgear Orbi RBK860 Käyttöohje

27 Maaliskuuta 2025
Netgear

Netgear Nighthawk S8000 GS808E Käyttöohje

14 Helmikuuta 2025
Netgear

Netgear Orbi RBE774 Käyttöohje

24 Joulukuuta 2024
Netgear

Netgear GS728TXPv3 Käyttöohje

16 Lokakuuta 2024
Netgear

Netgear GS305PPv3 Käyttöohje

16 Lokakuuta 2024
Netgear

Netgear Nighthawk GS808E Käyttöohje

16 Lokakuuta 2024
Netgear

Netgear RBEWM Käyttöohje

16 Lokakuuta 2024
Netgear

Netgear Orbi RBKE964 Käyttöohje

15 Lokakuuta 2024
Netgear

Netgear Orbi RBE772 Käyttöohje

15 Lokakuuta 2024
Netgear

Netgear Orbi RBKWMB Käyttöohje

15 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet

Daikin

Daikin EKWCTRDI1V3 Käyttöohje

9 Huhtikuuta 2025
Simplified MFG

Simplified MFG SP18CAT120 Käyttöohje

9 Huhtikuuta 2025
AudioQuest

AudioQuest Pegasus Käyttöohje

9 Huhtikuuta 2025
Reolink

Reolink P330 Käyttöohje

9 Huhtikuuta 2025
Reolink

Reolink NVS16-8MB8 Käyttöohje

9 Huhtikuuta 2025
Drive Medical

Drive Medical RTL12045 Käyttöohje

9 Huhtikuuta 2025
Kern

Kern MBC-A05 Käyttöohje

9 Huhtikuuta 2025
Daikin

Daikin EKEXVA250 Käyttöohje

9 Huhtikuuta 2025
Apc

Apc SurgeArrest Essential PE3WU3 Käyttöohje

9 Huhtikuuta 2025
AudioQuest

AudioQuest Yosemite Käyttöohje

9 Huhtikuuta 2025