Mixx StreamBuds Custom 3 Käyttöohje

Mixx Kuulokkeet StreamBuds Custom 3

Lue alta 📖 käyttöohje suomeksi merkille Mixx StreamBuds Custom 3 (68 sivua) kategoriassa Kuulokkeet. Tämä opas oli hyödyllinen 20 henkilölle ja sai 4.4 tähden keskimäärin 10.5 käyttäjältä

Sivu 1/68
[EN] [US] [CA] QUICK START GUIDE
[FR] GUIDE DE DÉMARRAGE RAPIDE
[DE] SCHNELLSTARTANLEITUNG
[NL] SNELSTARTGIDS
[ES] GUÍA BÁSICA DE INICIACIÓN
[IT] GUIDA RAPIDA
[PT] GUIA RÁPIDO
[DA] VEJLEDNING TIL HURTIG START
[FI] PIKAOPAS
[CZ] STRUČNÁ ÚVODNÍ PŘÍRUČKA
[SV] SNABBSTARTSGUIDE
[PL] SKRÓCONA INSTRUKCJA OBSŁUGI
[CF] GUIDE DE DÉMARRAGE RAPIDE
1
6
11
16
21
26
31
36
41
46
51
56
61
CONTENTS
CONTENU | INHALT | INHOUD | CONTENIDO
CONTENUT I CONTEÚDO | INDHOLD | SISÄLLYS
OBSAH | INNEHÅLL | ZAWARTOŚĆ | CONTENU
[EN/US] QUICK START GUIDE
LET’S STAY CHARGED
1
A voice prompt “Battery low” allows for 2 minutes play time before
the earbud(s) powers down stating “Battery low, power off”. The
Earbuds LED Light [2] will flash WHITE once and will then switch off.
Charge the earbuds using the Portable Charging Case [5] .
While charging, each Earbud LED Light [2] will be WHITE and once
fully charged the LED Lights will turn off. Secure the earbuds by
closing the lid.
When the earbuds are placed inside the case and the lid is closed, the
charge indicator light (7) will turn WHITE for 4 seconds to indicate
charging and then turn off.
The Earbuds
2
5
2
7
Note: If your earbuds and charge case do not have any power when
you first unpack them, place the earbuds into the charge case and
plug the charge case into a USB port using the USB C cable [8]
provided.
8
[EN] [US] [CA]
When first taking your earbuds out of the
packaging, please remove protective film
covering the charge points.
IMPORTANT!
The Portable Charging Case
Always connect the case via the USB C port [6] , to a suitable USB
wall charger, computer USB port or a power bank using the USB C
charging cable (8) supplied. Plug the supplied cable into the USB
C port [6] on the charge case.
The charge light indicator (7) will blink RED, on and off, to show the
case is charging.
8
7
6
6
2
1
First time pairing
LET’S CONNECT
When you open the Portable Charging Case [4] both earbuds
will turn on and connect together. A voice prompt will confirm with
‘Power on, pairing’. One Earbud LED Light [2] will flash WHITE to
indicate pairing mode.
Go to the Bluetooth settings on your audio device to select ‘MIXX
StreamBuds Custom’ from the list. Once paired successfully you
will hear ‘Connected’ and the Earbud LED Lights [2] will
turn off.
You can now enjoy your music, watch a video or take a call hands
free. The earbuds will automatically reconnect to the last device
they were paired with, confirming ‘Connected’.
5
2
2
[EN] [US] [CA]
TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for
15 minutes and get 2 hours extra play time while on the go
FACTORY RESET
When in pairing mode, independently ‘tap’ 4 times until power off
is announced, return bud to case. repeat with other bud. This will
complete the Factory Reset process.

Tuotetiedot

Merkki: Mixx
Kategoria: Kuulokkeet
Malli: StreamBuds Custom 3

Tarvitsetko apua?

Jos tarvitset apua merkille Mixx StreamBuds Custom 3 esitä kysymys alla ja muut käyttäjät vastaavat sinulle