Middle Atlantic LL-VWM-BPK Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Middle Atlantic LL-VWM-BPK (6 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 15 henkilölle ja sai 4.9 tähden keskimäärin 8 käyttäjältä

Sivu 1/6
I-00799 Rev -
VWM SERIES
Lever Lock™ Backpan Option
Instruction Sheet
Thank you for purchasing a VWM Lever Lock Backpan option. Please read these instructions
thoroughly before installing or assembling this product.
For more information, refer to the VWM Series
Vertical Wall Mount Rack Instruction Sheet (I-00796).
THANK YOU
6 plate with multi-pattern designed to hold a wide range of small devices
PRODUCT FEATURES
REQUIRED TOOLS
Page 2
SUPPLIED COMPONENTS AND HARDWARE
No. 2 Phillips Driver
(6x) 6-32 x 5/16
Phil. Bonding Screw
B
Backpan
Lever Lock Plate
(LL-VP176-SWP)
C
Backpan
Lever Lock
Brackets
A
1. Use (4x)
6-32 x 5/16 bonding
screws (B, 2 per side) to install the brackets (A) into any of the following
backpan locations. (FIGURE A)
INSTALLING THE LEVER LOCK BACKPAN OPTION
FIGURE A
LOCATION 1
LOCATION 2
LOCATION 3
Bracket
Bonding Screw
Holes on
Backpan
(4x holes per
location)
!
!
CAUTION! The bonding screws must be
used as explained to ensure proper
bonding.
ATTENTION! Les vis doivent être utilisées
comme expliqué pour assurer approprié
électrique de liaison.
B
(2x) Lever Lock
Securing Rivet
D
(20x) Lever Lock
Plate Washer
E
Page 3
NOTE: The bracket bonding screw holes are located on the inside edges of the backpan. Each bracket
is assembled as shown. ( )FIGURE B
INSTALLING THE LEVER LOCK BACKPAN OPTION (CONTINUED)
FIGURE B
Bracket Bonding
Screw Holes

Tuotetiedot

Merkki: Middle Atlantic
Kategoria: Ei luokiteltu
Malli: LL-VWM-BPK

Tarvitsetko apua?

Jos tarvitset apua merkille Middle Atlantic LL-VWM-BPK esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Middle Atlantic Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet