Lezyne E-Bike Power StVZO E500+ Käyttöohje

Lezyne Polkupyörän lamppu E-Bike Power StVZO E500+

Lue alta 📖 käyttöohje suomeksi merkille Lezyne E-Bike Power StVZO E500+ (2 sivua) kategoriassa Polkupyörän lamppu. Tämä opas oli hyödyllinen 26 henkilölle ja sai 4.8 tähden keskimäärin 13.5 käyttäjältä

Sivu 1/2
Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installaon may require
some disassembly of the bike and motor (depending on make and model/baery type) and addional wiring to connect the
light to the motor. Please contact the e-bike or motor manufacturer for installaon instrucons. Please note: Any disassembly
may void the warranty of your e-bike. It is highly recommended to have a trained e-bike professional install your lights for you.
Below is general informaon about electrical connecvity.
READ ENTIRE MANUAL BEFORE OPERATION to ensure proper use and care of your new Lezyne LED light. Traffic laws mandang
lighng vary from country to country. Inform yourself about lighng laws and regulaons in the country of use.
Installation
74318-EMANUAL FOR Y17 E-BIKE POWER StVZO E500+-EN-R0A1
Lezyne recommends that our E-Bike lights be installed by an E-bike professional. Below is general informaon about wiring
and mounng the light to a compable bike.
The light must be mounted in a height between 400 mm and 1200 mm. It must be ensured that the light technical equipment
will not be covered by any parts of the bike (re, etc…).
MANUAL - E-BIKE POWER StVZO E500+ - EN
Lezyne USA, 645 Tank Farm Rd., Unit F, San Luis Obispo, California 93401
7 -A1-EN4318
Motors Compatibility
Bosch (6V) / Bosch (12V)
Shimano E5000, E7000, E6100, E6110, E9000
Shimano E6000, E6001, E6010, E6050
Shimano E8000, E8080, E6002, E6012
Yamaha PWse / Yamaha PW
BionX
Brose Drive T (2018) / Brose Drive S (2018)
Connental 48V Prime / Connental 48V Revoluon
Warnings
The light technical equipment must be safely installed during the enre usage and must be ensured that the light will not be
moved in its posion due to unintenonal adjustment.
DO NOT LOOK DIRECTLY INTO LIGHT BEAM or shine into eyes of another.
Lezyne LED Lights have a water resistance rang of IPX7 under IEC standard 60529. Submerging the device is not
recommended. If moisture does enter the casing, air out unl completely dry.
DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will void warranty.
Lezyne USA, Inc. does not accept any liability for injuries or other damages resulng from the improper use or improper
installaon of this product in any circumstance.
Wa antyrr
In U.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date to the original owner
(proof of purchase required). Lezyne warranes cover any manufacturing defects in materials or workmanship. Issues not
covered by warranty include normal wear & tear, improper installaon, aempng to access or modify electronics, damage
or failure due to accident, misuse, abuse and/or neglect.
For all warranty issues worldwide, please contact the retailer that sold the product.
In the case of an LED not working properly or not working at all do not use your light anymore. These lights must be
replaced immediately.
For any warranty quesons contact: warranty@lezyne.com
Operat nio
The front light will be controlled via the on board electronics of the E-bike system. These lights are only to be mounted on
E-Bikes with DC voltage that have their own baery charge indicaon and control. The e-bike system must be capable of
automacally shung the light o when the onboard baery reaches a crical voltage to avoid deep dischaging of the
baery.
For more informaon on Lezyne products, visit: www.lezyne.com
More In rmat nfo io
Aluminum Fork Mount
▼Forward Center Mount
Aluminum Fork Mount
Between
400 mm
and
1200 mm
Floor
▼Forward Center Mount
Floor
Between
400 mm
and
1200 mm
ø35 mm
ø31.8 mm
Apply handlebar adapter to adjust diameter if needed.
Use a torque wrench with
a Hex M3 andghten to
1 - 2 m (10-20 kgf*cm)
HEX : M3
HANDLEBAR
Technical Data
Output
Ampere
Wa age
Input voltage
Illuminant
Power cable length
500 umenL
1.0A
MAX.9W
10.5-13.5V AC DC
4 LED
130 mc
Bolt and Washer are not
included because of the variety
of mounng opons.
HANDLEBAR
HANDLEBAR
Tightening torque : 12 m
2339
2339
2339
2339
2339
EU SINGLE POINT OF CONTACT
Lezyne Europe GmbH
Rolandstrasse 4
14129 Berlin, Germany
CORPORATE HQ
Lezyne USA, Inc.
5470 Kietzke Lane, Suite 300
Reno, NV 89511
CALIFORNIA OFFICE
Lezyne USA, Inc.
645 Tank Farm Rd., Suite F,
San Luis Obispo, California
93401
TAIWAN BRANCH / MANUFACTURER
Lezyne USA, Inc. - Taiwan Branch
No.162, Shigu Lane
Guozhong Road, Dali District
Taichung City 412, Taiwan, ROC
For all inquiries, contact: support@lezyne.com
Black NegaveYellow + Posive

Tuotetiedot

Merkki: Lezyne
Kategoria: Polkupyörän lamppu
Malli: E-Bike Power StVZO E500+

Tarvitsetko apua?

Jos tarvitset apua merkille Lezyne E-Bike Power StVZO E500+ esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Polkupyörän lamppu Lezyne Käyttöohjeet

Polkupyörän lamppu Käyttöohjeet

Viimeisimmät Polkupyörän lamppu Käyttöohjeet