Intermatic T30604R Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Intermatic T30604R (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 21 henkilölle ja sai 4.5 tähden keskimäärin 11 käyttäjältä

Sivu 1/4
Many of today’s energy efficient pools and spas utilize the benefits of the two stage water circulation
principal. For example, while the daily cleaning process requires high pressure and fast turnover of
a large amount of water in the morning, the heating,
either by the sun or a heater, is more energy efficient
on a slower flow rate during the day. Also, some of
the new water sanitation techniques require longer
dispensing time of ozone or chemicals.
The most economical way to operate a pool or spa
is by the use of a two speed filter pump, together
with this reliable, simple to install, simple to operate
This Control is designed to automatically operate
a two speed pump on a daily schedule. The
all-weather enclosure contains two heavy duty,
industrial grade time switches. In addition, the
enclosure has a provision to install switches or a
GFCI receptacle on the side as well as inside the
enclosure. The time switch on the right is intended
for starting and stopping the pump and the time
switch on the left is for changing the speed (RPM)
of the pump while it is running. The mechanism on
the right can also accommodate an optional heater
control (Fireman) switch.
Model: T30604R
TIME CONTROL FOR TWO SPEED POOL/SPA FILTER PUMPS FOR INDOOR/OUTDOOR USE
ELECTRICAL RATING: 5 H.P. Max. - 240 Volt - 60 Hz.
Maximum running load not to exceed 28 Amperes.
Suitable for Pool Equipment Control and for Direct Conduit Connection to a
Wet-Niche or No-Niche Underwater Luminaire
DANGER! TO AVOID RISK OF INJURY:
...do not permit children to operate the Control Unit or use the Pool/Spa unless they are closely supervised at all times.
...test GROUND FAULT protection regularly. If it fails to reset, DO NOT USE THE POOL or SPA!
Contact a qualified service technician.
...always disconnect electricity before servicing this control or the equipment connected to it. THIS CONTROL IS NOT TO BE
USED AS A POWER DISCONNECT.
READ, FOLLOW AND SAVE THIS INSTRUCTION MANUAL
GENERAL INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
When installing and operating this electrical control and other associated equipment, basic safety precautions should always be followed,
including the following:
1. Read and follow all instructions.
2. This Control must be installed by a qualified electrician, according to National and Local Electrical Codes.
3. Install this control not less than 5 feet (3 meters in Canada) from inside edge of pool. USE COPPER CONDUCTORS ONLY.
4. Do not exceed the maximum ratings of individual components, wiring devices, and current carrying capacity of conductors.
5. For grounding and bonding this Control and the installation, refer to Article 680 of the National Electrical Code.
6. The Control should not operate any equipment which would cause bodily injury or property damage should it be activated unexpectedly.
READ, FOLLOW AND SAVE THIS INSTRUCTION MANUAL
1
T30604R SERIES
POOL/SPA EQUIPMENT CONTROLS
INSTALLATION
OPERATION &
SERVICE MANUAL

Tuotetiedot

Merkki: Intermatic
Kategoria: Ei luokiteltu
Malli: T30604R

Tarvitsetko apua?

Jos tarvitset apua merkille Intermatic T30604R esitä kysymys alla ja muut käyttäjät vastaavat sinulle