Intermatic ET9100 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Intermatic ET9100 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 35 henkilölle ja sai 4.5 tähden keskimäärin 18 käyttäjältä

Sivu 1/2
ET9100 Door Assembly
Door Assembly Replacement Instructions
MODEL ET9100
Turnpoweroffatmainpanelbeforeservicingthisswitchortheequipmentitcontrols.
Morethanonedisconnectswitchmayberequiredtode-energizetheequipmentbeforeservicing.
WARNING
Beforeremovingthedoorassemblycableconnections,backuptheET90000scheduleprogramsontoaUSBdevice.Failureto
dosowillresultinprogramloss.Ifprogramsarelost,refertotheET90000ElectronicTimeInstallationandProgrammingGuide
forprogramminginstructions.
Risk of Fire or Electric Shock
Follow this procedure to replace the ET90000 Time Switch door assembly.
1. Make sure power to the ET90000 Time Switch is de-activated.
2. Open the time switch enclosure cabinet door.
3. Remove the screws on the deadfront and remove the deadfront from the enclosure.
Set aside the deadfront and screws for reuse.
4. Remove the screw that secures the time switch door assembly and open the door assembly.
Set aside the screws for re-use.
Figure 1. Removing the deadfront.
Deadfront Screws
Deadfront

Tuotetiedot

Merkki: Intermatic
Kategoria: Ei luokiteltu
Malli: ET9100

Tarvitsetko apua?

Jos tarvitset apua merkille Intermatic ET9100 esitä kysymys alla ja muut käyttäjät vastaavat sinulle