Integral LED ILRC1224VCV3C3A Käyttöohje

Integral LED Helpotus ILRC1224VCV3C3A

Lue alta 📖 käyttöohje suomeksi merkille Integral LED ILRC1224VCV3C3A (2 sivua) kategoriassa Helpotus. Tämä opas oli hyödyllinen 49 henkilölle ja sai 5.0 tähden keskimäärin 25 käyttäjältä

Lataa PDF

Sivu 1/2

Integral LED RGB Colour Changing Remote Control and Receiver

ILRC1224VCV3F3A/ ILRC1224VCV3C3A

1. Introduction 2. Parameter

Receiver:

• Compatible Remote: M3/M6

• Power Input: DC12V~DC24V

• Max Current Load: Max 3Ax3CH

• Max Output Power: 108W(12V)/216W(24V)

• Gray Scale Level: Max4096×4096×4096

• Working Temp.: -30ºC~55 Cº

• Dimensions: L135×W30×H20(mm)

• Weight (N.W.): 47g

Total Weight (G.W.): 135g

Remote:

• Working Voltage: 3V (battery CR2032)

• Working Frequency: 433.92MHz

• Remote Distance: 40m~50m

• Working Temp.: -20ºC~55 Cº

• Remote Dimensions: L104×W58×H9(mm

• Remote Holder Dimensions:

L108×W63×H14(mm)

• Weight(N.W.): 42g

INTRODUCTION

The Integral LED RGB Colour Changing Remote

Control and Receiver is designed to work with

the Integral LED RGB Colour Strip. You will be

able to change the colour of the strip in dierent

colour modes to change the mood and look of

your space instantly. You can also dim the strip to

your ideal level. The strip can also switch between

dierent colour modes on continuous basis to

add excitement.

Power input socket

Remote ID learning

bu on

Indic or lightat

LED lamp c n socketonneco

RGB V+ RGB control

3. Operating Instruction for Receiver

The Remote control has been matched to the receiver before leaving the factory, if deleted accidentally you can restore the ID as follows.

Learning ID: Short press the ID learning button on the receiver until the indicator light is on, then press any key on the remote control, the indicator

light ashes several times. The ID is now activated.

Cancel ID: Press ID learning button on the receiver for 5 seconds.

One receiver can be matched to up to 10 remote controls.

WARNING

DO NOT CONNECT THE RECEIVER TO A MAINS SUPPLY.

THE RECEIVER MUST ONLY BE CONNECTED TO A SUITABLE 12V/24V LED DRIVER.

IMPORTANT NOTICE