Funn Mamba Käyttöohje

Lue käyttöohje merkille Funn Mamba ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 25 henkilölle. Kysyttävää mallista? Esitä kysymys

INSTALLATION AND USE

Pedals have 9/16" x 20T threaded axles. The right pedal is installed in a clockwise

direction. The left pedal is installed in a counter-clockwise direction.

1.Lightly lubricate axle threads with grease or oil.

2.Thread axle into the crank hole with your fingers. From the other side of the crank,

insert 8 mm Allen key into the recess of the axle. Screw pedal axles onto crank

arms.

3.Tighten to 34 Nm (300 lb-in) torque and avoid excessive force.

ATTACH PEDALS TO CRANKS

GRIP PINS

You can remove the pins on the pedals to fine tune the grip. Damaged or worn grip

pins can be replaced using 4 mm socket wrench.

8mm Hex Key

MAMBA features the GRS system for easily lubricating the bushing .

1.Use 2mm Allen key to remove the GRS screw.

2.Lubricate the bushing with a synergy and wipe of the excessive oil.

3.Tighten the screw back on to seal the GRS port.

GRS SYSTEM

Arvostele tämä ohje

Tuotetiedot

Jos tarvitset apua merkille Funn Mamba esitä kysymys alla ja muut käyttäjät vastaavat sinulle