Extron TLP 700MV Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Extron TLP 700MV (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.5 tähden keskimäärin 6 käyttäjältä

EWB 700 User Guide

The Extron

®

EWB 700 is

an optional accessory for

mounting the TLP 700MV

touchpanel onto the surface

of various wall types (such as

drywall, wood, or masonry)

where it is not possible to

embed the touchpanel in

the wall. The EWB 700 has

knockouts that accept raceways

or conduit for running cables

over the surface of the wall to

the touchpanel.

The following items are

required for installation, but

are not supplied:

• Extron TLP 700MV (includes

Extron TR 700M Trim Ring)

• Four screws (Extron recommends a

minimum length of 1 inch, if possible)

• Power drill

• Drill bit that is appropriate for wall type

• Conduit or surface raceway to carry cables

• Screwdriver

• Level

Fastener Suggestions for Different Wall Types

Choose a type of screw or bolt that is appropriate for the wall (see table below). The

mounting holes in the back of the EWB 700 accommodate screws up to ¼ inch in diameter.

Wall TypeFastenersMin. Size

Fastener

QuantityDrill Bit

Size

Notes

DrywallToggle bolts3/16 inch41/2 inchMin. 3/8 inch

wall thickness

Wood

(solid wall

or stud)

Wood screws#10 screw

with a

washer

41/16 inch

wood bit

Min. 3/8 inch

wall thickness

MasonryMasonry

screws

1/4 inch43/16 inch

masonry bit

Do not mount to

masonry joints

Mounting the EWB 700

1. If mounting to standard wood wall studs, locate

the center of the studs.

2. Place the EWB 700 against the wall in a suitable

location. Use a level to ensure the box is horizontal

and mark the position of the four holes.

3. If required, drill four holes into the wall.

4. Insert four screws (see the table above) and attach

the EWB 700 to the wall.

Mounting

Screws (4)

4

Conduit

Cables

Extron

EWB 700

Wall Box

Extron

TR 700M

Trim Ring

Extron

TLP 700MV

Extron

TLP 700MV

Faceplate

Tuotetiedot