Extron 70-1065-30 Käyttöohje

Sivut 2 Engels Ei luokiteltu

Lue käyttöohje merkille Extron 70-1065-30 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 37 henkilölle. Kysyttävää mallista? Esitä kysymys

Retractor SM Horizontal Bracket • Installation Guide
The Cable Retractor SM series requires this mounting bracket for horizontal
installations. Use the Horizontal Mounting Bracket to x the Retractor under the
table. Slotted holes allow for tolerance in placing the bracket.
See the at Retractor SM Installation Guidewww.extron.com prior to beginning this
installation.
ATTENTION:
• Ensure the supplied screws do not pierce through the top of the table. If
necessary, use appropriate screws based on the table material and thickness.
nécessaire, utilisez des vis plus appropriées en fonction du matériau de la table
et de son épaisseur.
Trace around
bracket perimeter.
End Caps
NOTE:Be certain the system is perpendicular to the enclosure to prevent
binding of the pulley system.
3. Ensure the bracket is ush with surface and trace a line around the bracket
perimeter.
4. Lower the assembly and remove the Horizontal Bracket from the Retractors.
To ensure accuracy follow these procedures:
1. With the Retractors installed in the enclosure, attach the horizontal mounting
bracket to the Retractor end caps using the provided pin and clip.
2. Raise the Retractors with attached
bracket to the desired mounting
location.

Arvostele tämä ohje

Tuotetiedot

Merkki: Extron
Kategoria: Ei luokiteltu
Malli: 70-1065-30

Tarvitsetko apua?

Jos tarvitset apua merkille Extron 70-1065-30 esitä kysymys alla ja muut käyttäjät vastaavat sinulle