CRUX DKGM-16W Käyttöohje

CRUX Ei luokiteltu DKGM-16W

Lue alta 📖 käyttöohje suomeksi merkille CRUX DKGM-16W (7 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.8 tähden keskimäärin 19 käyttäjältä

Sivu 1/7
- Retains factory features in select GM LAN 29 Bit vehicles while func oning with an rmarket
radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- Retains OnStar, factory Rear view camera and chime fun ons.
- Adds Forced Rear view and Front view camera while in mo
on using the factory side mirror
controls.
- Supports Bose, non-Bose and Y-91 audio systems.
-
-
EIA color coded wiring for easy installa on.
Includes Double DIN Dash Kit
1. The Front and Rear fading are not retained on Y-91 Bose System.
2. Chime includes: seat belt, check engine, key in igni
on, low fuel, low oil and lights on.
Video Harness
SETTING THE AFTERMARKET RADIO BRAND
With the key in the o pos on, set the DIP switches to the corresponding a rmarket radio se ng.
3.5MM SWC CABLE
Plug in the 4-Pin SWC cable to the 4-pin connector plug on the module.
NOTE: Cap or insulate the 3.5mm plug, the Blue/Yellow or Green wires if not being used.
SWC 3.5MM PLUG ADAPTER:
RAD IO REP LACEMENT
SWC RETEN TION
+
R
INTERFACING SOLUTIONS
DKGM-16W
Dash Kit oidaR noitagivaN htiw SKCURT & sVUS tiB 92 NAL MG rof
PRODUCT FEATURES:
NOTES:
DIP SWITCH SETTINGS:
DKGM-16W Module
DKGM-16W HarnessDouble Din Dash Kit
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
1 of 7
Radio Replacement with OnStar Retention, SWC Retention, & Double DIN
SWC Cable &
Antenna Adaptor
rev.03282023
RSE Retention
Harness
Provides Factory Rear Seat Entertainment Activation with RSE Cable #CRUX2444A
-

Tuotetiedot

Merkki: CRUX
Kategoria: Ei luokiteltu
Malli: DKGM-16W

Tarvitsetko apua?

Jos tarvitset apua merkille CRUX DKGM-16W esitä kysymys alla ja muut käyttäjät vastaavat sinulle