CRUX CUL-08 Käyttöohje

Sivut 1 Engels Valvontakamera

Lue käyttöohje merkille CRUX CUL-08 ilmaiseksi verkossa tai lataa PDF. Ohje on ollut hyödyllinen 40 henkilölle. Kysyttävää mallista? Esitä kysymys

WHITE Wire

Parking Guideline

Regulator

Extension Coax Cable

GROUND

RED Wire (A)*

Camera

RED Wire (B)*

Make sure the arrows

line up and push in

the connectors well.

To Aftermarket Radio

Backup Camera Input

Reverse Camera Interface

Backup Camera Input

BLUE Wire

Flip Image Horizontally

*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to insulate RED Wire A to avoid it from

shorting. If you will be tapping power from the reverse light +12V, insulate RED Wire B to avoid it from shorting. With either connection

the Black GROUND wire needs to be connected to a solid chassis ground. For vehicles with manual transmission, we recommend tapping

+12V power from the reverse light.

WHITE Wire: Connect to show parking guide line. Disconnect to remove.

BLUE Wire: Connect to ip image horizontally to use as front facing camera. Disconnect to use as reverse camera.

(Not all cameras will have a Parking Guide Line or Flip Image function.)

INTERFACING SOLUTIONS

Sightline

CAMERAS

Crux Interfacing Solutions • 6860 CanbyAve., Suite 116, Reseda, CA 91335

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

Arvostele tämä ohje

Tuotetiedot

Jos tarvitset apua merkille CRUX CUL-08 esitä kysymys alla ja muut käyttäjät vastaavat sinulle