Cateye GE100 Käyttöohje
Cateye
Ei luokiteltu
GE100
Lue alta 📖 käyttöohje suomeksi merkille Cateye GE100 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 35 henkilölle ja sai 4.2 tähden keskimäärin 18 käyttäjältä
Sivu 1/2
ENG
*1
2
4
3
1
Turn the E-Bike adapter counterclock-
wise to separate the adapter from the
headlight and the bracket holder.
Turn the bracket holder and align the grooves on the E-Bike
adapter to the grooves on the headlight, and turn clockwise
until the adapter stops.
Design Pat. Pending
Copyright© 2021 CATEYE Co., Ltd.
HLEB570G-210521
1
1
HOW TO MOUNT TO A BICYCLE
• This instruction manual is intended for use
by E-Bike specialists.
Do not attempt to install this headlight if
you are not experienced with E-Bikes.
Consult your dealer for more information.
• After mounting the headlight, dealers are
expected to explain how to use the light and
to provide this instruction manual to the
customer.
K 1808
HL-EB570G
GE100 FEATURES
The GE100 headlight connects directly to the E-Bike
drive unit for use. The headlight includes a visor to
direct the light distribution, allowing the unit to be
mounted on the top or bottom of the handlebar.
See “2. Mounting the headlight” for how to change
the mounting position of the E-Bike adapter. The
e-bike light GE100 can also be used as a battery
light via the optionally available battery. See
“Removing & optional use as battery light” for more
information.
Mounted below Mounted above
1. Mounting the bracket
2. Mounting the headlight
Wrap the strap around the
handlebar.
Attach the dial.
Securely tighten the dial.
Cut
2
3
1
Headlight
Handlebar diameter :
Φ
22 – 35 mm
Mounting height : 400 – 1200 mm
Rubber pad
Bracket Strap
Strap
Dial
CAUTION!:
• Be sure to tighten the dial by hand. When you tighten it too hard with a tool, the screw thread may be
stripped.
• Check the dial and screw (*1) on the bracket periodically, and use them without any loosening.
• Round off the cut edge of the bracket strap to prevent injury.
Always mount the light with the visor facing upwards so
that the low beam is correctly aligned.
E-BIKE HEADLIGHT
Instruction Manual for E-Bike Dealers
Connector specifications
Bracket holder
E-Bike adapter
Click
Removing
Mounted above Mounted below
Visor
Mounting
CAUTION!:
• When attaching or removing the E-Bike adapter, be sure to hold the headlight to prevent it from
dropping and becoming damaged.
• Do not attach the cartridge battery if water droplets, dust, or other foreign matter is attached to the
unit, and do not touch the terminals.
• Never position the visor to the bottom of the headlight.
Doing so will dazzle oncoming traffic.
WARNING!!!
(Risk of death; Prevention of accidents)
• Do not look directly at the light source. In addition,
when mounting the light unit, ensure that the light
will not dazzle other road users. Position the visor
of the head unit to the top of the headlight.
• Before your trip, please make sure the light is
firmly mounted to the bracket and it lights up. The
light must not be obscured.
• Do not disassemble or modify the light or any of the
included items.
CAUTION!
(Prevention of injury, damage, or property damage)
• Operating the light while riding is dangerous.
Always ride safely.
• Note that the light becomes hot while illuminated.
Do not block the lens or cover the light.
• Due to the variability of LEDs, the color and
brightness may differ even between devices with
the same model number.
• Do not place it within children’s reach.
•
Do not remove the E-Bike adapter when the light is on.
• Do not attach the E-Bike adapter if water droplets,
dust, or other foreign matter is attached to the unit.
Also, do not touch the terminals.
• Never use a high-pressure hose to clean the light.
• This device is rated IPX4 based on JIS C0920. Do
not immerse the device in water. Doing so may
cause a malfunction. Wipe off any moisture after
using the device in rainy weather.
• Do not subject the light to strong vibrations,
impacts, or excessive force. Discontinue use if any
abnormality occurs.
• Do not charge or use the battery at any voltage or
polarity other than that specified. Do not short-cir-
cuit the battery.
• Do not drop the light into a fire or heat the light.
• If the light unit or parts become dirty with mud,
etc., clean with a soft cloth which is moistened with
mild soap. Never apply paint thinner, benzine or
alcohol; damage will result.
Screw
(Horizontal adjustment)
Dial (Vertical adjustment)
FlexTight™ bracket
(H-34N)
Relay cable
GP bracket
Headlight
Bracket holder
E-Bike adapter
Connector
Protective cap
Included Items
Light unit
* This section explains how to mount the light unit below the
handlebar.
Tuotetiedot
| Merkki: | Cateye |
| Kategoria: | Ei luokiteltu |
| Malli: | GE100 |
Tarvitsetko apua?
Jos tarvitset apua merkille Cateye GE100 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Cateye Käyttöohjeet
30 Joulukuuta 2025
30 Joulukuuta 2025
30 Joulukuuta 2025
30 Joulukuuta 2025
17 Joulukuuta 2024
17 Joulukuuta 2024
17 Joulukuuta 2024
17 Joulukuuta 2024
17 Joulukuuta 2024
17 Joulukuuta 2024
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu EBERLE
- Ei luokiteltu Grillmeister
- Ei luokiteltu Drawmer
- Ei luokiteltu NANO Modules
- Ei luokiteltu Shimbol
- Ei luokiteltu INOGENI
- Ei luokiteltu Bravilor Bonamat
- Ei luokiteltu Texas
- Ei luokiteltu Harman Kardon
- Ei luokiteltu Step2
- Ei luokiteltu DEXP
- Ei luokiteltu Aputure
- Ei luokiteltu I.safe Mobile
- Ei luokiteltu Gamma
- Ei luokiteltu Heatit
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025