AXESS AXVT Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXVT (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 36 henkilölle ja sai 4.4 tähden keskimäärin 9 käyttäjältä

AXVT

INSTALLATION INSTRUCTIONS

REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.com

• Provides 12-volts DC output when voltage is at or above 13.5-volts DC

• Designed for vehicles that do not provide accessory (switched) power

• 10-amp fuse included for safety

• Provides accessory power (13.5-volts 10-amps)

• Delayed turn-off after vehicle has been turned off

INTERFACE FEATURES

• Crimping tool and connectors, or solder gun, solder, and heat shrink

• Tape • Wire cutter • Zip ties

• Connect the wire to chassis ground.Black

• Connect the Yellow wire to battery power.

• Connect the wire to the aftermarket device's accessory (switched) power wire.Red

TOOLS REQUIRED

CONNECTIONS TO BE MADE

AXVT Accessory Provider

CAUTION! All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

Tuotetiedot