AXESS AXTRIG Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXTRIG (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 43 henkilölle ja sai 4.0 tähden keskimäärin 4 käyttäjältä

AXTRIGAXTRIG

INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONS

AXTRIGAXTRIG

INSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS

REV. 12/31/19REV. 12/31/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

REV. 12/31/19REV. 12/31/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

INTRODUCTION

The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,

and exhibition vehicles.

INTRODUCTION

The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,

and exhibition vehicles.

INTRODUCTION

The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,

and exhibition vehicles.

INTRODUCTION

The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,

and exhibition vehicles.

CAUTION!

All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition. Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!

All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition.Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!

All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition.Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

CAUTION!

All accessories, switches, climate controls panels, and especially air bag

indicator lights must be connected before cycling the ignition.Also, do not remove

the factory radio with the key in the on position, or while the vehicle is running.

Connections to be made

Wiring the AXTRIG:

1.Connect the Black wire to chassis ground.

2.

Connect the Blue wire to the aftermarket radios amplifier turn-on wire

.

3.Connect the Green wire to the parking brake wire of the aftermarket radio.

4.Connect the Yellow wire to the foot brake wire of the aftermarket radio

(Alpine only).

Attention!This product is meant to be used in RV’s, off road vehicles, and exhibition

vehicles only. Other applications are illegal.

Connections to be made

Wiring the AXTRIG:

1.Connect the Blackwire to chassis ground.

2.

Connect the Blue wire to the aftermarket radios amplifier turn-on wire

.

3.Connect the Greenwire to the parking brake wire of the aftermarket radio.

4.Connect the Yellow wire to the foot brake wire of the aftermarket radio

(Alpine only).

Attention!This product is meant to be used in RV’s, off road vehicles, and exhibition

vehicles only. Other applications are illegal.

Connections to be made

Wiring the AXTRIG:

1.Connect the Blackwire to chassis ground.

2.

Connect the Blue wire to the aftermarket radios amplifier turn-on wire

.

3.Connect the Greenwire to the parking brake wire of the aftermarket radio.

4.Connect the Yellow wire to the foot brake wire of the aftermarket radio

(Alpine only).

Attention!This product is meant to be used in RV’s, off road vehicles, and exhibition

vehicles only. Other applications are illegal.

Connections to be made

Wiring the AXTRIG:

1.Connect the Blackwire to chassis ground.

2.

Connect the Blue wire to the aftermarket radios amplifier turn-on wire

.

3.Connect the Greenwire to the parking brake wire of the aftermarket radio.

4.Connect the Yellow wire to the foot brake wire of the aftermarket radio

(Alpine only).

Attention!This product is meant to be used in RV’s, off road vehicles, and exhibition

vehicles only. Other applications are illegal.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

®

Metra recommends MECP

certified technicians

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

®

Metra recommends MECP

certified technicians

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

®

Metra recommends MECP

certified technicians

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

®

Metra recommends MECP

certified technicians

Tuotetiedot