Atdec AWMS-DW Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Atdec AWMS-DW (4 sivua) kategoriassa Litteän paneelin tuki. Tämä opas oli hyödyllinen 32 henkilölle ja sai 4.4 tähden keskimäärin 16.5 käyttäjältä

Sivu 1/4
AWMS-DW Page 1 of 4
Installation Guide
AWMS-DW
Dynamic Arm Wall Mount
COMPONENT CHECKLIST
A
Single Wall
Bracket
G
Screw
M4x25mm
(x4)
H
Screw
M4x16mm
(x4)
I
Screw
M4x12mm
(x4)
F
Spacer
(x4)
J
Security
Screw
E
Washer
(x2)
D
Screw
M8x70mm
(x2)
K
4mm
Hex Key
L
6mm
Hex Key
C
VESA
Head
B
Dynamic
Monitor Arm
REQUIRED TOOLS
Phillips head screwdriver
Power drill
Suitable drill bit
Driver bit for selected
wall fasteners
Stud nder
Spirit level
WEIGHT RANGE
Flat Monitor
0 - 9kg (0 - 20lb)
Curved Monitor
0 - 6kg (0 - 13.5lbs)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Do not remove or throw away the plastic sleeve on wall bracket and arm links.
! The manufacturer accepts no responsibility for incorrect installation.
! Failure to install this product correctly may cause serious injury/death during or following installation.
! This product is not suitable for outdoor use.
! Do not use this product for mobile applications.
! This product should only be installed by professional installers of good mechanical aptitude, who have experience with
building construction, and fully understand these instructions and the consequences of incorrect installation.
! Supplied wall fasteners are for timber stud wall constructions . For other wall constructions, such as masonry, alternative only
suitable wall fasteners should be sourced by the installer.
! To safely achieve the full capacity of this product, wall fasteners must have a pull-out (tension) force rating of at least 100kg
(1000N) per fastener. This rating must include a safety factor.
! Professional installer to ensure adequate structural capacity of wall (including appropriate safety factor) to support total
weight of all equipment being mounted.
! Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid
electrical cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.
! Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts),
and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor
weight may be within the stated range. Please contact Atdec if you would like further information.

Tuotetiedot

Merkki: Atdec
Kategoria: Litteän paneelin tuki
Malli: AWMS-DW

Tarvitsetko apua?

Jos tarvitset apua merkille Atdec AWMS-DW esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Litteän paneelin tuki Atdec Käyttöohjeet

Atdec

Atdec AWMS-HXB-H Käyttöohje

30 Tammikuuta 2025
Atdec

Atdec AWM-W Käyttöohje

30 Tammikuuta 2025
Atdec

Atdec AWMS-DW Käyttöohje

30 Tammikuuta 2025
Atdec

Atdec AWMS-DW6-S Käyttöohje

7 Joulukuuta 2024
Atdec

Atdec AWM-W-S Käyttöohje

7 Joulukuuta 2024
Atdec

Atdec AD-WF-8060 Käyttöohje

7 Joulukuuta 2024
Atdec

Atdec AD-WT-8060 Käyttöohje

7 Joulukuuta 2024
Atdec

Atdec AD-WF-10090 Käyttöohje

7 Joulukuuta 2024

Litteän paneelin tuki Käyttöohjeet

Viimeisimmät Litteän paneelin tuki Käyttöohjeet

Chief

Chief LPE1U Käyttöohje

3 Huhtikuuta 2025
Chief

Chief MWCU Käyttöohje

3 Huhtikuuta 2025
Chief

Chief KITXWXSM1U Käyttöohje

3 Huhtikuuta 2025
Chief

Chief RLXT3 Käyttöohje

3 Huhtikuuta 2025
Proaim

Proaim P-DMC Käyttöohje

2 Huhtikuuta 2025
Proaim

Proaim CT-VNGD-CS Käyttöohje

2 Huhtikuuta 2025
Mount-It!

Mount-It! MI-7919 Käyttöohje

2 Huhtikuuta 2025
Mount-It!

Mount-It! MI-384 Käyttöohje

2 Huhtikuuta 2025