Advantech MOS-1130Y-0201E Käyttöohje

Advantech Ei luokiteltu MOS-1130Y-0201E

Lue alta 📖 käyttöohje suomeksi merkille Advantech MOS-1130Y-0201E (5 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 25 henkilölle ja sai 4.6 tähden keskimäärin 13 käyttäjältä

Sivu 1/5
MOS-1130 User Manual 1
1. Packing List
2. Initial Inspection
MOS-1130Y-0201E Isolated CANBus iDoor Module
MOS-1130Y- a 2-Ports Isolated CANBus mini- PCIe, DB9. 0201E is
This manual covers the assignment for the CAN connector,and the wiring the two transmission wires. pin of
MOS- 1130
miniPCIe Card x 1
DB37 I/O Plate x 2 with iDoor bracket x 1
FPC cable x 2
Startup Manual x 1
Note: If any of these items are missing damaged, please contact your distributor sales representative immediately. or or
You should nd the following items inside the shipping package:
Mini-PCIe communication interface card
Industrial Communication Driver, Utility and mini-PCIe communication card user's manual in DVD-ROM
MOS- was carefully inspected mechanically 1130 and electrically before was shipped. it It should be free of marks and
scratches and in perfect working order when received.
As you unpack the MOS Module, check for signs of shipping damage (damaged box, scratches, dents, etc.). If it is
damaged or it fails to meet specications, notify our service department or your local sales representative immediately. Also
notify the carrier. Retain the shipping carton and packing material for inspection the carrier. by
After inspection will make arrangements we to repair replace the unit. When you handle the MOS Module, remove or
it from its protective packaging by grasping the rear metal panel. Keep the anti-vibration packing. Whenever you remove
the card from the PC, store in this package for protection. it
Warning!
Discharge your body’s static electric charge by touching the back of the grounded chassis of the system unit
(metal) before handling the board. You should avoid contact with materials that hold a static charge such as
plastic, vinyl and Styrofoam. Handle the board only by its edges to avoid static damage to its integrated circuits.
Avoid touching the exposed circuit connectors. We also recommend that you use a grounded wrist strap and place
the card on a static dissipative mat whenever you work with it.

Tuotetiedot

Merkki: Advantech
Kategoria: Ei luokiteltu
Malli: MOS-1130Y-0201E

Tarvitsetko apua?

Jos tarvitset apua merkille Advantech MOS-1130Y-0201E esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Advantech Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet