Yphix IP20 Käyttöohje
Yphix
Ei luokiteltu
IP20
Lue alta 📖 käyttöohje suomeksi merkille Yphix IP20 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 20 henkilölle ja sai 4.3 tähden keskimäärin 10.5 käyttäjältä
Sivu 1/2

OFF
ON
Installation Manual
YPHIX POB 16 - 50464010
LUX
3
30300
TIME
10S15min
7min
3min
30S
90S
1 2 3 4
5 6 7
8
Specifications: Detection range:360° | Voltage: 220-240V/AC | Rated load:CFL / LED 300W - Incandescent bulbs 1200W
Detection distance: 6 meters (<24°C) | Time delay: 10 seconds - 7 minutes | IP20 | Installation height: 2.2 - 4.0 meters
®
Product omschrijving
De YPHIX® POB 16 bewegingsmelder werkt door middel van een PIR-sensor.
Wanneer beweging wordt waargenomen schakelt de bewegingsmelder een
aangesloten verbruiker (bijv. een lamp) in.
De sensor heeft een bereik van 6 meter met een hoek van 360°.
Voorbereiding
Schakel de stroom uit (1) met de hoofschakelaar in de meterkast. Draai de
afdekkap van de behuizing af (2).
De bewegingsmelder aansluiten op 230V AC
Sluit het netsnoer aan met de schroefklemmen (3).
Verbind de draden zoals aangegeven in het aansluitschema (3).
Bewegingsmelder op het plafond installeren.
Bevestig de bewegingsmelder met twee schroeven en pluggen vast aan het
plafond (4).
Instellen van de bewegingsschakelaar
TIME = De tijd instellen waarin de lamp blijft branden. Draai de knop voor de
tijd (5) naar de gewenste positie. De tijd kan ingesteld worden tussen 10
seconden en 15 minuten.
LUX = Instellen bij welke lichtsterkte de lamp inschakelt.
Draai de knop voor de lichtsterkte (6) naar de gewenste positie. De lichtsterkte
kan ingesteld worden tussen 3 en 2000 LUX.
Zet de afdekkap weer op de behuizing (7).
Schakel de stroom in met de hoofschakelaar in de meterkast (8).
Werking bewegingsmelder
De in de bewegingsmelder geïntegreerde PIR-sensor reageert op temperatuur-
wijzigingen in het registratiebereik. Na het activeren van de netspanning duurt
het ca. 60 seconden voordat de PIR-bewegingsmelder zich op de achtergrond-
temperatuur heeft ingesteld en de temperatuurwijziging in het registratiebereik
herkent.
Product description
The YPHIX® POB 16 motion detector operates using a PIR-sensor. When motion
is detected the sensor turns on the load automatically. Motion is detected up to
6 meters, with a field of view of 360°.
Preparation for use
Switch off the mains (1). Disconnect the cover from the housing by turning it
counter clockwise (2).
Connect the motion detector to 230V AC
Connect the wires as shown in the wiring diagram (3) to the terminal block.
Install motion detector on the ceiling
Attach the sensor to the ceiling by mounting it with the two wall plugs and
mounting screws provided (4). Replace the cover (7) and lock it by turning it
clockwise. Turn on the mains (8).
Setting the motion switch
TIME = Set the time delay to the desired setting (5). The time the light remains
on can be set from 10 seconds to 7 minutes.
LUX = Set the light intensity to the desired setting (6). The brightness can be
set from 3 to 2000 LUX.
Function of the motion detector
The integrated PIR motion sensor reacts to temperature changes in the
detection range. After switching on the power it takes about 60 seconds before
the PIR motion detector has set the ambient temperature and recognizes the
temperature change in the detection area.
LN
LN
A
YPHIX
P.O. Box 25
6720 AA Bennekom
The Netherlands
Tuotetiedot
| Merkki: | Yphix |
| Kategoria: | Ei luokiteltu |
| Malli: | IP20 |
Tarvitsetko apua?
Jos tarvitset apua merkille Yphix IP20 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ei luokiteltu Yphix Käyttöohjeet
22 Tammikuuta 2025
22 Tammikuuta 2025
Ei luokiteltu Käyttöohjeet
- Ei luokiteltu Bliss Outdoors
- Ei luokiteltu Lawn Star
- Ei luokiteltu Thorens
- Ei luokiteltu Pawa
- Ei luokiteltu Oromed
- Ei luokiteltu (Recovery)
- Ei luokiteltu Agfa
- Ei luokiteltu Pabobo
- Ei luokiteltu Logitech
- Ei luokiteltu Lincoln Electric
- Ei luokiteltu Total
- Ei luokiteltu Ergotools Pattfield
- Ei luokiteltu Gen Energy
- Ei luokiteltu Morphor
- Ei luokiteltu Nofred
Viimeisimmät Ei luokiteltu Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025