Wasp Delta 2040 Clay Käyttöohje
Wasp
3D-tulostin
Delta 2040 Clay
Lue alta 📖 käyttöohje suomeksi merkille Wasp Delta 2040 Clay (37 sivua) kategoriassa 3D-tulostin. Tämä opas oli hyödyllinen 27 henkilölle ja sai 4.3 tähden keskimäärin 14 käyttäjältä
Sivu 1/37
MANUAL OF USE AND MAINTENANCE
ORIGINAL INSTRUCTIONS
Discalaimer
IMPORTANT:
We kindly praise to read carefully and comprehend totally the content in this manual of Use and
Maintanance.
The missing acknowledgment of the manual can be cause of personal injury, worst quality results
or damages to the printer Delta WASP 2040 Clay. Always make sure that the personal using the 3D
printer knows and understands the content of the manual in order to the best results from DELTA
Delta WASP 2040 Clay.
No part of this publication may be reproduced, stored in a filing system or transmitted to third parties in any form or by any means, without
the Manufacturer having issued a prior written authorization. The Manufacturer reserves the right to make changes to its products at any
time and without notice in order to constantly increase the quality, therefore this publication may also be subject to future modifications and
updates.
Copyright 2018 CSP S.r.l. – All rights reserved
1 First edition 31/07/2019
Revision Reason for the revision Revision date
© CSP S.r.l.
3
Summary
0 Premises .......................................................................... 5
0.1. Aim of the instruction manual ............................................ 5
0.2. How the read the manual of instructions ...................... 6
0.3. Storage of the manual of instructions ........................... 6
0.4. Updating the manual of instructions .............................. 6
1 General information ....................................................... 7
1.1. Manufacturer identification data ......................................7
1.2. Indentification label ................................................................ 7
1.2.1. Position of the label on the printer .....................................8
1.3. Testing ..........................................................................................8
1.4. Warranty ......................................................................................8
1.5. Declaration of conformity ...................................................9
1.6. General safety warnings.................................................... 10
1.6.1. Personal protective equipment ........................................ 10
1.6.2. Operators for whom the manual is intended .............. 11
1.6.3. Residual risks ............................................................................11
1.6.4. Safety stickers ..........................................................................12
1.7. Glossary and pictograms .................................................. 13
1.7.1. Identification of operating personnel ............................13
1.7.2. Editorial pictograms ...............................................................14
2 Description of the printer .......................................... 15
2.1. Control panel .......................................................................... 16
2.2. Work area ................................................................................. 17
2.3. External area of the printer .............................................. 18
2.4. Technical data ........................................................................ 18
2.5. Noisiness .................................................................................. 19
2.6. Intended use of the printer .............................................. 19
2.7. Improper use of the printer .............................................. 19
3 Transport and handling ..............................................20
3.1. General warnings .................................................................. 20
3.1.1. Delivery of the printer ............................................................20
3.2. Unpackaging ........................................................................... 21
3.3. Content ..................................................................................... 21
3.4. Lifting and handling of the printer ................................. 21
4 Installation .......................................................................22
4.1. General warnings .................................................................. 22
4.1.1. Placement ................................................................................... 22
4.2. Electrical connection .......................................................... 23
5 Preparing to use the printer .....................................25
5.1. General warnings .................................................................. 25
5.2. User interface ......................................................................... 26
5.2.1. Main board ..................................................................................26
5.2.2. Menù print ...................................................................................27
5.2.3. PREPARE menu ........................................................................28
5.2.5. INFO menu .................................................................................. 29
5.3. First start .................................................................................. 29
6 First use of the printer ................................................30
6.1. General warnings .................................................................. 30
7 Ordinary and extraordinary maintanance ..........31
7.1. General warnings .................................................................. 31
7.1.1. Print bed cleaning ...................................................................33
7.2. Extraordinary maintenance ............................................. 34
7.3. Pulizia estrusore........................................................................
Tuotetiedot
| Merkki: | Wasp |
| Kategoria: | 3D-tulostin |
| Malli: | Delta 2040 Clay |
Tarvitsetko apua?
Jos tarvitset apua merkille Wasp Delta 2040 Clay esitä kysymys alla ja muut käyttäjät vastaavat sinulle
3D-tulostin Wasp Käyttöohjeet
16 Lokakuuta 2024
16 Lokakuuta 2024
3D-tulostin Käyttöohjeet
- 3D-tulostin Raise3D
- 3D-tulostin Creality
- 3D-tulostin Creality3D
- 3D-tulostin Craftbot
- 3D-tulostin MakerBot
- 3D-tulostin Orbbec
Viimeisimmät 3D-tulostin Käyttöohjeet
27 Tammikuuta 2025
17 Tammikuuta 2025
17 Tammikuuta 2025
15 Tammikuuta 2025
15 Tammikuuta 2025
10 Tammikuuta 2025
29 Joulukuuta 2024
25 Joulukuuta 2024
25 Joulukuuta 2024
25 Joulukuuta 2024