Viewsonic M1XB Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Viewsonic M1XB (17 sivua) kategoriassa Beamer. Tämä opas oli hyödyllinen 12 henkilölle ja sai 4.5 tähden keskimäärin 6.5 käyttäjältä
Sivu 1/17

M1XB
Portable LED Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
Model No. VS19530
P/N: M1XB

2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

3
Safety Precautions
Please read the following Safety Precauons before you start using the projector.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instrucons.
• Allow at least 20" (50 cm) clearance around the projector to ensure proper
venlaon.
• Place the projector in a well-venlated area. Do not place anything on the
projector that prevents heat dissipaon.
• Do not place the projector on an uneven or unstable surface. The projector may
fall over, causing personal injury or projector malfuncon.
• Do not look straight at the projector lens during operaon. The intense light
beam may damage your eyes.
• Always open the lens shuer or remove the lens cap when the projector lamp is
on.
• Do not block the projecon lens with any objects when the projector is under
operaon as this could cause objects to become heated and deformed or even
cause a re.
• The lamp becomes extremely hot during operaon. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
• Do not use lamps beyond the rated lamp life. Excessive use of lamps beyond the
rated life could cause them to break on rare occasions.
• Never replace the lamp assembly or any electronic component unless the
projector is unplugged.
• Do not aempt to disassemble the projector. There are dangerous high voltages
inside which may cause death if you should come into contact with live parts.
• When moving the projector, be careful not to drop or bump the projector on
anything.
• Do not place any heavy objects on the projector or connecon cables.
• Do not stand the projector on end vercally. Doing so may cause the projector to
fall over, causing personal injury or projector malfuncon.
• Avoid exposing the projector to direct sunlight or other sources of sustained
heat. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including ampliers) that may increase the temperature
of the projector to dangerous levels.
Tuotetiedot
Merkki: | Viewsonic |
Kategoria: | Beamer |
Malli: | M1XB |
Tarvitsetko apua?
Jos tarvitset apua merkille Viewsonic M1XB esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Beamer Viewsonic Käyttöohjeet
15 Helmikuuta 2025
11 Tammikuuta 2025
7 Tammikuuta 2025
7 Tammikuuta 2025
7 Tammikuuta 2025
7 Tammikuuta 2025
7 Tammikuuta 2025
3 Tammikuuta 2025
18 Joulukuuta 2024
26 Lokakuuta 2024
Beamer Käyttöohjeet
- Beamer Vivitek
- Beamer Canon
- Beamer Casio
- Beamer Barco
- Beamer Nec
- Beamer Kodak
- Beamer Microtek
- Beamer Panamorph
- Beamer Optoma
- Beamer AWOL Vision
- Beamer Nebula
- Beamer Naxa
- Beamer InFocus
- Beamer AOpen
- Beamer Celexon
Viimeisimmät Beamer Käyttöohjeet
2 Huhtikuuta 2025
5 Maaliskuuta 2025
5 Maaliskuuta 2025
26 Helmikuuta 2025
20 Helmikuuta 2025
20 Helmikuuta 2025
20 Helmikuuta 2025
11 Helmikuuta 2025
7 Helmikuuta 2025
2 Helmikuuta 2025