Valcom Station Port VIP-811 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Valcom Station Port VIP-811 (28 sivua) kategoriassa Verkkokortti/sovitin. Tämä opas oli hyödyllinen 39 henkilölle ja sai 4.4 tähden keskimäärin 7 käyttäjältä

1 947026

ISSUE 5

VIP-811

NETWORKED STATION PORT

INTRODUCTION

The VIP-811 Networked Station Port allows most

loop start terminal devices to be connected to a

managed IP-based LAN/WAN.

SPECIFICATIONS

Access Methods

PBX, FXO Port

POTS telephone set

Features

RJ-45 for network connection

1 RJ-11 telephone connections

2 Relays with Form C contacts

Front panel activity LED

Network activity LEDs

1 REN

2.5mm jack for external power

Power over Ethernet (PoE) 802.3af compatible

Dimensions/Weight

1.38” H x 6.13" W x 5.25" D

(3.50cm H x 15.6cm W x 13.33cm D)

Weight: 1.25 lbs. (0.57 kg)

Nominal Specifications

Input Impedance: 600 Ohms

Input Level: -10dBm

Output Impedance: 600 Ohms

Output Level: - 10dBm nominal

Relay Current: 1 AMP @ 24VDC

Nominal Power Requirements

Via rear panel barrel connector:

Voltage: 24VDC

Current: 325mA

Via 802.3af PoE Ethernet Switch:

802.3af: Class 3

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Packing List

Qty Item

1 VIP-811

1 VSP Document

2

Mounting Brackets W/ Hardware

4 Rubber Pads

INSTALLATION

NOTE: The telephone system referred to in this

manual is the customer premise equipment

such as an electronic key system, a PBX or a

dedicated single line telephone sets. The VIP-

811 is not intended for direct or indirect

connection to the public telephone network.

When used with a customer premise telephone

system such as a key system or PBX system,

these units are interfaced to the system via a

fully protected trunk port or system central

office port, which is a fully protected interface

device. Also, the host system must be

configured to disallow central office trunk

conferencing in order to prevent indirect

connection to the public network.

Tuotetiedot