Valcom S-525 Käyttöohje

Valcom Kaiutin S-525

Lue alta 📖 käyttöohje suomeksi merkille Valcom S-525 (3 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 31 henkilölle ja sai 4.4 tähden keskimäärin 16 käyttäjältä

Sivu 1/3
Issue 1
1 947442
P-TEC VOICE PAGING SPEAKER
S-525
INTRODUCTION
Clarity P-TEC Voice Paging Speakers are suitable
for voice paging as well as background music.
The S-525 is a 70 Volt model with adjustable taps
and volume control. P-TEC speakers consist of a
surface-mount baffle. The baffle is designed for
mounting on acoustic tile, such as those normally
found in suspended-ceilings; and can be mounted
without cutting large holes in the tile. The mount-
ing pins can be removed for mounting in a hard
ceiling. The speaker housing has screw holes for
securing speaker without mounting pins. Although
the P-TEC speakers are designed especially for
standard suspended ceilings, they can be used on
many types of ceiling materials. P-TEC speakers
are not suitable for use in plenum ceiling
environments.
DIMENSIONS/WEIGHT
8.00”Dia. x 2.50”D (20.32cm x 6.35cm)
1.25 lbs. (.57 kg)
INSTALLATION
Selecting the Power-Tap Wire
1. Remove the Quick-Connect connector from
the accessory pack.
2. Select the desired power-tap wire:
Yellow = 1/4 Watt
Red = 1/2 Watt
Green = 1 Watt
White = 2 Watt
Blue = 4 Watt
Note: Refer to spacing chart (Figure 6) for recom-
mended speaker spacing.
Figure 1. 70 Volt P-TEC Paging Speaker
3. Install the Quick-Connect connector on the
wire. Use pliers to close the connector over
the wire. The connector can be removed by
prying it open with a screwdriver, and can be
reused several times (See Figure 2).
Figure 2. Attaching the Reuseable Quick-Connect
Connector
Volume Control
Reusable
Quick-Conne
ct
Connector
Tap Wire

Tuotetiedot

Merkki: Valcom
Kategoria: Kaiutin
Malli: S-525

Tarvitsetko apua?

Jos tarvitset apua merkille Valcom S-525 esitä kysymys alla ja muut käyttäjät vastaavat sinulle