V-Tac VT-6042-4 Käyttöohje

V-Tac Tuuletin VT-6042-4

Lue alta 📖 käyttöohje suomeksi merkille V-Tac VT-6042-4 (10 sivua) kategoriassa Tuuletin. Tämä opas oli hyödyllinen 34 henkilölle ja sai 4.3 tähden keskimäärin 17.5 käyttäjältä

Sivu 1/10
CAUTION
The product must only be installed by an authorized electrician and in compliance with local,
regional and state electricity regulations.
Check if the electricity specification of this device are compatible with your installation.
Turn off the power before installing or repairing the fan.
The fan must be properly grounded to avoid the risk of electric shock.
Use and unauthorized technical modifications could suppose a risk of injury.
Should be 220V as per the specifications.
(engine humming) and cause engine damage.
Be careful while working near the spinning blades.
The fan must be installed so that the blades are at least 2, 3 meters above the ground.
The fan must be hung from a structure capable of supporting a weight of at least 50 kg. The
fixture must be able to support the weight of the fan in motion and should not wobble or
loosen.
Make sure that the blades do not come in contact with any object at the installation site.
Always leave a minimum clearance of 50cm from the tip of the blades to the wall or ceiling.
Keep in mind that the larger the space, the better the fans air flow will be.
This device is designed for indoor use only. Do not use in an open space or where it may be
exposed to water or moisture.
Never install the appliance in a room with a high degree of humidity.
The fan must not be started in a room with a gas appliance running at the same time.

Tuotetiedot

Merkki: V-Tac
Kategoria: Tuuletin
Malli: VT-6042-4

Tarvitsetko apua?

Jos tarvitset apua merkille V-Tac VT-6042-4 esitä kysymys alla ja muut käyttäjät vastaavat sinulle