TP Link LS1210P Käyttöohje

TP Link Ei luokiteltu LS1210P

Lue alta 📖 käyttöohje suomeksi merkille TP Link LS1210P (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 151 henkilölle ja sai 4.9 tähden keskimäärin 76 käyttäjältä

Lataa PDF

Sivu 1/2

Installation Guide

Desktop PoE+ Switch

LS106P/LS110P/LS1210P

LED Explanation

Power

PoE

On: Providing PoE power

O: No powered devices or not providing PoE

power

On: Power on

O: Power o

Link/Act; Uplink (LS110P) Uplink (LS1210P)

On:

Running at 10/100 Mbps, but no activity.

Flashing:

Running at 10/100 Mbps and

transmitting or receiving data.

O:

No device is linked to the corresponding

port.

On:

Running at 10/100/1000 Mbps, but no activity.

Flashing:

Running at 10/100/1000 Mbps and

transmitting or receiving data.

O:

No device is linked to the corresponding

port.

Switches Explanation

Isolation

O: Ports can transmit data with each other.

On: The corresponding ports cannot transmit data with other downlink ports. They can

transmit data only with the uplink port.

Extend

O: The corresponding ports run at 10/100 Mbps and support PoE power supply up to

100 m away.

On: The corresponding ports run at 10 Mbps and support PoE power supply up to 250 m

away.

Recovery

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD).

When the switch nds that the PD works abnormally, the switch will reboot it.

Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend (Port 1-4) is toggled to On, the Extend mode will be enabled for

ports 1-4.

Installation

Connection

Desktop:

Attach the supplied feet to the

bottom of the switch to prevent it

from slipping when placed on a

desktop.

Note: For detailed information, please refer to

the Wall Mounting Guide on the device’s

support page.

Wall-mounting: