TCL TAC-09CHSD/TPG11IT Käyttöohje
TCL
Ilmastointi
TAC-09CHSD/TPG11IT
Lue alta 📖 käyttöohje suomeksi merkille TCL TAC-09CHSD/TPG11IT (39 sivua) kategoriassa Ilmastointi. Tämä opas oli hyödyllinen 9 henkilölle ja sai 4.2 tähden keskimäärin 5 käyttäjältä
Sivu 1/39
CONTENTS
NAMES OF PARTS
INDOOR UNIT DISPLAY
OPERATING INSTRUCTIONS
INSTALLATION MANUAL
MAINTENANCE
TROUBLESHOOTING
EMERGENCY FUNCTION & AUTO-RESTART FUNCTION
REMOTE CONTROLLER
................................................................................................................4
.......................................................................................................5
.............................................6
.......................................................................................................7
.............................................................................................11
....................................................................................................20
....................................................................................................................35
..........................................................................................................36
..................................................................................................1
SAFETY PRECAUTIONS
SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER
The ratings of the fuse installed in the built
in control unit are 4A / 250V .
Only use the air conditioner as instructed in
this booklet.
The appliance must be installed in accordance
with applicable national regulations.
Before accessing the terminals , all the power
circuits must be disconnected from the power
supply.
1
The appliance must be fitted with means for
disconnection from the supply mains having a
contact separation in all poles that provide full
disconnection under overvoltage category III
conditions, and these means must be incorporated
in the fixed wiring in accordance with the wiring
rules.
The appliance shall be installed in accordance
with national wiring regulations.
SAFETY RULES AND RECOMMENDATIONS FOR THE USER
Cleaning and maintenance must be carried out
by specialized technical personnel. In any case
disconnect the appliance from the mains
electricity supply before carrying out any
cleaning or maintenance.
If the appliance gives off smoke or there is a
smell of burning, immediately cut off the pow
er supply and contact the Service Centre.
Have repairs carried out only by an authorised
Service Centre of the manufacturer . Incorrect
repair could expose the user to the risk of
electric shock, etc.
This appliance has been made for air
conditioning domestic environments and must
not be used for any other purpose.
The batteries in remote controller must be
recycled or disposed of properly.
2
Unhook the automatic switch if you foresee
not to use the device for a long time.
The airflow direction must be properly adjusted
SAFETY RULES AND PROHIBITIONS
3
Do not obstruct the air inlet or outlet of the
indoor or the outdoor unit.
The obstruction of these openings causes a
reduction in the operative efficiency of the
conditioner with possible consequent failures
or damages.
This appliance is not intended for use by
persons (including children ) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
If the supply cord is damaged, it must be
replaced by the manufacturer,its service
agent or similarly qualified persons in
order to avoid a hazard.
4
NAMES OF PARTS
Air filter
Air deflector and flap
Emergency button
Front panel
Air inlet
Air outlet
Indoor unit
Outdoor unit
Note: This figure shown may be different from the actual
object. Please take the latter as the standard.
Mounting plate
Air outlet
Air inlet
Drainage pipe
Wiring cover
Connection wiring
Valve protective cover
With the protective
cover removed
Liquid valve
(High pressure valve)
Gas valve
(Low pressure valve)
Refrigerant
connection pipe
Remote controller
INDOOR UNIT DISPLAY
5
The shape and position of switches and indicators may be different according to the model, but their
function is the same.
2
No.
Led Function
1
2
3
Temperature display (if present)
/Error code
(1) Lights up during Timer operation when
the air conditioner is operational
(2)Displays the malfunction code when
fault occurs.
SLEEP mode
Lights up during Timer operation.
SLEEP
TIMER
3
1
EMERGENCY FUNCTION & AUTO-RESTART FUNCTION
6
The shape and position of the emergency button
may be different according to the model, but their
function is the same.
Emergency
button
The emergency button is located on E-box cover
of the unit under the front panel.
front panel
Open and lift the front panel up to an angle to reach
the emergency button.
If the remote controller fails to work or maintenance
necessary, proceed as following:
The appliance is preset with an auto-restart function.
In case of a sudden power failure, the module will
memorizes the setting conditions before the power
failure. When the power restores, the unit will restart
automatically with the previous settings preserved
by the memory function.
For heating model, press the emergency button first
and the unit will operate in COOL mode. Press for a
second time within 3 seconds, and unit will operate in
HEAT mode. Press for third after 5 seconds, the unit
will turn off.
For cooling only models, press the emergency button
once, and the unit will operate in COOL mode. Press
again, the unit will turn off.
8
REMOTE CONTROLLER
The shape and position of buttons and indicators may vary according to the model, but their function is the same.
The display and some functions of the remote control may vary according to the model.
The unit confirms the correct reception of each button with a beep.
To turn on/off the air conditioner
8
10
12
6
7
9
MODE
TURBO
11
1
2
(TEMP DN)
(TEMP UP)
3
4
FAN
5
No.
To activate the function of Child Lock, press and buttons
together for more than 3 seconds.
13
14
( + )
15
To decrease the setting temperature, reduce the time in TIMER setting.
To select the operation mode: AUTO, COOL, DRY, FAN, HEAT.
To switch on/off the TURBO mode
To adjust the fan speed: auto, mute, low, mid-low, mid, mid-hign, high. Turbo
To adjust the air flow direction vertically(optional).
To increase the setting temperature, lengthen the time in TIMER setting.
16
17
GENTLE WIND To activate the function of Gentle wind.
To adjust the air flow direction horizontally.
I FEEL To activate the function of I FEEL
To switch on/off the GENERATOR mode
TIMER/SLEEP To switch on/off the TIMER function and SLEEP mode
ECO/DISPLAY
To switch on/off the HEALTH function and Auto Clean function..
HEALTH/CLEAN
To switch on/off the ECO mode and LED display light
TIMER/SLEEP + ECO/DISPLAY
ECO/DISPLAY + HEALTH/CLEAN
To switch on/off the CHILL WIND and HOT WIND fucntion.
To switch on/off the CHILL WIND and HOT WIND fucntion.
I SET To activate the function of I SET
18
Remote controller buttons
Buttons Function
Certain functions may not be available for your air conditioner.
The batteries in remote controller must be recycled or disposed of properly.
9
REMOTE CONTROLLER
Remote controller DISPLAY, meaning of symbols on the liquid crystal display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AUTO MODE indicator
COOLING MODE indicator
DRY MODE indicator
FAN MODE indicator
HEATING MODE indicator
TIMER indicator
AUTO FAN indicator
FAN SPEED indicator
SLEEP MODE indicator
FLAP SWING (Air flow) indicator
15
TURBO indicator
16
17
HEALTHY indicator
18
ECO indicator
Meaning
No. Symbols
TEMPERATURE/ CLOCK indicator
BATTERY indicator
19
I FEEL indicator
20
MUTE indicator
(FLASH)
or
8 C heating function indicator
GENERATOR MODE indicator
21
22
GENTLE WIND indicator
CHILL WIND indicator
HOT WIND indicator
DISPLAY LIGHT indicator
CLEAN function indicator
23
24
25
CHILD LOCK indicator
10
Replacement of Batteries
Remove the battery cover plate from the rear of the remote controller,
by sliding it in the direction of the arrow.
Install the batteries according the direction (+and -)shown on the Remote
Controller.
Reinstall the battery cover by sliding it into place.
Use 2 LRO 3 AAA (1.5V) batteries . Do not use rechargeable
batteries . Replace the old batteries with new ones of the same
type when the display is no longer legible.
Do not dispose batteries as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
Recommendations for locating and using the remote controller holder (if present).
The remote controller be kept in a wall-mounted holder.
OPERATING INSTRUCTIONS
Filter
Heat
Fan
Exchanger
11
The direction of the air outlet is motorized up and down
by flaps, and manually moved right and left by the vertical
deflectors, for some models, the vertical deflectors could be
controlled by motor as well.
The air sucked by the fan enters from the grill and
passes through the filter, then it is cooled/dehumidified
or heated through the heat exchanger.
Fan
Turn ON / Turn OFF the air conditioner
Press the button to turn on or turn off the air conditioner.
COOLING MODE
The cooling function allows the air condit-
ioner to cool the room and at the same time
reduces Air humidity.
To activate the cooling function ( COOL ) , press the
MODE button until the symbol appears on
the display.
With the button or set a temperature lower than
that of the room.
OPERATING INSTRUCTIONS
HEATING MODE
DRY MODE
The heating function allows the air conditi-
oner to heat the room.
To activate the heating function ( HEAT ) , press the
MODE button until the symbol appears on
the display.
With the button or set a temperature higher than
that of the room.
In HEATING operation, the appliance can automatically
activate a defrost cycle, which is essential to clean the
frost on the condenser so as to recover its heat exchange
function. This procedure usually lasts for 2-10 minutes.
During defrosting, indoor unit fan stop operation.
After defrosting, it resumes to HEATING mode
automatically.
This function reduces the humidity of the
air to make the room more comfortable.
To set the DRY mode , Press MODE until
appears in the display. An automatic
function of pre-setting is activated.
FAN MODE(Not FAN button)
Fan mode, air ventilation only.
To set the FAN mode, press MODE until
appears on the display.
AUTO MODE
Automatic mode.
To set the AUTO mode, press MODE until
appears on the display.
In AUTO mode the run mode will be set automatically
according to the room temperature.
12
13
OPERATING INSTRUCTIONS
Horizontal Flaps
flap
movement Vertical Deflectors
AIR FLOW CONTROL
Flaps manually, the delicate
mech-anism might seriously damaged!
Never poke fingers, sticks or other objects in the
air inlet or outlet vents. Such accidental contact
with liveparts might cause unforeseeable damage
or injury.
This adjustment must be done while the
appliance is switched off.
1. Normal 4 way air flow (vertical and horizontal):
(1) Press to activate the horizontal flaps to
swing from up to down. Press again to stop the swing
movement at the current angle.
(2) Press to active the vertical deflectors to
swing from left to right. Press again to stop the swing
movement at the current angle.
2. Vector precise air flow
(1)Press and hold for 1s, it will go into the horizontal
vector air flow, you can select a small swing angle you
want:
Stop selection for 5s, press again, exit the horizontal vector precise air flow.
(2) Press and hold for 1s, it will go into the vertical
vector air flow:
Stop selection for 5s, press again, exit the vertical vector precise air flow.
3. If the vertical deflectors are positioned manually whichplaced under the flaps, they are allowed to move
the air flow direct to rightward or leftward.
Change the fan speed
Press FAN button to set the running fan speed, it can
be set to AUTO/ MUTE/ LOW/ MID-LOW/ MID/ MID-HI/
HIGH/TURBO speed.
Flashing
14
OPERATING INSTRUCTIONS
GENTLE WIND (Optinal)
In this mode the appliance will close its
vertical louvers, the air flow through the holes
of louvers, the room is cool but no winds.
Press the GENTLE WIND button shortly, the appears on
the display, and the appliance will run in GENTLE WIND mode.
Press again to cancel it..
NOTE:
The gentle wind function is available in COOLING mode only.
I FEEL function
I FEEL
Press I FEEL button to active the function, the
will appear on the remote display.
Do it again to deactivate this function.
This function enables the remote control to measure
the temperature at its current location, and send this
signal to the air conditioner to optimize the temperature
around you and ensure the comfort.
It will automatically deactivate 2 hours later.
Turbo function
To activate turbo function, press the TURBO button,
and will appear on the display.
In COOL/HEAT mode, when you select TURBO
feature, the appliance will operate the fast cooling/
fast heating with the highest fan speed.
Press again to cancel this function.
OPERATING INSTRUCTIONS
16
LED display light ON/OFF
Press DISPLAY button and hold for 2s to turn on/off
the indoor LED display light.
HEALTH function (Optional)
Press HEALTH button to active / exit the health functions
such as ion generator/ plasma etc
Note: Health function is not available when the air conditioner
is off.
1. This function help carry away the accumulated
dirt, bacteria, etc from the evaporator.
2. Turn off the air conditioner, press "CLEAN" button to enter
this function and it will show "CL" on the display of indoor unit.
3. This function will run about 30 minutes, and it will exit
automatically. You will hear 2 beeps when it's finished or
cancelled.
4. It's normal if there are some noise during this function
process, as plastic materials expand with heat and
contract with cold.
5.We suggest operate this function as the following ambient
condition to avoid certain safety protection features.
6. We suggest operate this function once every 3 months.
Indoor unit
Outdoor unit
Temp<30
5 <Temp<30
SELF-CLEAN function (Optional)
OPERATING INSTRUCTIONS
17
TIMER MODE----SET TIMER OFF
TIMER
To set the air conditioner switching-off
automatically.
With the AC off, press the Timer button and use the
and buttons to set the desired amount of time before the
AC turns on. Press the timer button again to start the countdown.
When the timer setting was done, you can set the operation mode,
fan speed, desired temperature, air flow when air conditioner star
to run.
Note:To cancel , press the TIMER
button again.
the set function
Note:In case of power off,it is necessary to set TIMER
OFF again
TIMER MODE----SET TIMER ON
TIMER
Note: To cancel the timer function ,press the TIMER
button again.
Note: In case of power off, it is necessary to set TIMER
ON again
With the AC on, press the Timer button and then use the
and buttons to set the length of time before the AC
will turn off. Press the timer button again to start the
countdown.
To set the air conditioner switching-on
automatically.
OPERATING INSTRUCTIONS
In each mode of COOLING/HEATING/FAN/DRY, adjust the
temperature(COOLING/HEATING), fan speed (COOLING/
HEATING/FAN)and swing as your favourite, then keep
pressing "I SET" button over 3 seconds until "AU" appears
on the display and the background of display change to
lighting, the remote controller will run and remember
these settings. You can reset it by repeat the above operation.
In each mode of COOLING/HEATING/FAN/DRY, press "I SET"
button to active this function, the AC will run as your
favourite setting and you will see AU flashing on the
remote controller. Press it again or other buttons to
cancel this function.
I SET function(Optional)
18
CHILL wind/ HOT wind function (Optional)
8 heating function (Optional)
1.Press both ECO/DISPLAY and HEALTH/CLEAN buttons and
hold for 2s to active the 8 heating.
2.If the air conditioner is standby, this function enable the
air conditioner automatically start heating when the
indoor temperature is equal or lower than 8 , it will return
standby if the temperature is equal or higher than 18 .
1. In cooling mode, press both TIMER/SLEEP and ECO/DISPLAY
buttons and hold for 2s to active the chill wind function.
2. In heating mode, press both TIMER/SLEEP and ECO/DISPLAY
buttons and hold for 2s to active the hot wind function.
3. Press both TIMER/SLEEP and ECO/DISPLAY buttons and hold
for 2s to exit the chill wind or hot wind function.
3.When the AC was turn off, press both ECO/DISPLAY and
HEALTH/CLEAN buttons and hold for 2s to exit the 8 heating.
19
The air conditioner is programmed for comfortable and suitable living conditions as below
if used outside the conditions, certain safety protection features might come into effect.,
OPERATING INSTRUCTIONS
Operating Temperature
Fix air conditioner:
MODE
Temperature
Room temperature
Outdoor
temperature
Cooling operating Heating operating Drying operating
17 ~32 0 ~27 17 ~32
15 ~43
For T1 Climate
15 ~52
For T3 Climate
-7 ~24
Inverter air conditioner:
MODE
Temperature
Room temperature
Outdoor
temperature
Cooling operating Heating operating Drying operating
17 ~32 0 ~30 17 ~32
15 ~53
-15 ~53
For models with low
temperature cooling
system
-20 ~30
The unit does not operate immediately if it is turned on after being turned off or after changing
the mode during operation.This is a normal self-protection 3
minutes.
action, you need to wait for about
The capacity and efficiency are according to the test conducted at full-load operation(The
highest speed of indoor fan motor and the maximum open angle of the flaps and deflectors
are requested.)
15 ~43
For T1 Climate
15 ~52
For T3 Climate
15 ~53
-15 ~53
For models with low
temperature cooling
system
Tuotetiedot
| Merkki: | TCL |
| Kategoria: | Ilmastointi |
| Malli: | TAC-09CHSD/TPG11IT |
Tarvitsetko apua?
Jos tarvitset apua merkille TCL TAC-09CHSD/TPG11IT esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ilmastointi TCL Käyttöohjeet
31 Maaliskuuta 2025
23 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
16 Tammikuuta 2025
Ilmastointi Käyttöohjeet
- Ilmastointi Profile
- Ilmastointi Khind
- Ilmastointi Avidsen
- Ilmastointi Bosch
- Ilmastointi Fuji Electric
- Ilmastointi Blaupunkt
- Ilmastointi Svan
- Ilmastointi General
- Ilmastointi Profilo
- Ilmastointi Aspes
- Ilmastointi KDK
- Ilmastointi SereneLife
- Ilmastointi Whirlpool
- Ilmastointi BISWIND
- Ilmastointi SEEGER
Viimeisimmät Ilmastointi Käyttöohjeet
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025
9 Huhtikuuta 2025