Synco PX Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Synco PX (2 sivua) kategoriassa Mikrofoni. Tämä opas oli hyödyllinen 37 henkilölle ja sai 4.6 tähden keskimäärin 19 käyttäjältä

Sivu 1/2
Microphone P1X
User Manual
Thank you for choosing SYNCO product. Please read this manual
carefully before use and follow all instructions mentioned herein.
1. TX Transmitter
2. RX Receiver
① Power Key
② Working Indicator
④ Back Clip
⑤ Type-C Charging Port
Lightning Connector
Type-C Connector
① Volume Button
② Type-C Port
③ Working Indicator
④ Connector
Caring For Your SYNCO Product
Package List
Product Introduction
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids
warranty.
· Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics
damage.
· Warranty does not apply to human errors.
① Transmitter
② Receiver
Slow Flash
Slow Flash
Illuminate sequentially
1~5 indicators on
Single indicator keeps on
Single indicator 󽗊ashed
slowly
Unpaired
Unpaired
Paired, normal working
Connected and working normally.
The number of lights on indicates the
current volume
Noise cancellation on
Mute on
Working Indicators (White Light) On: Flash:
Working Indicators (White Light) On: Flash:
1. Turn On/O󽗈
Operations
Transmitter: Long press the power button of the transmitter for 3
seconds.
*Note:The transmitter will shut down automatically if it is unpaired
or disconnected for 5 minutes.
② Receiver: Insert the mobile phone device to switch on
automatically, and the indicator 󽗊ashes.
Transmitter x1 Charging cable
x1
Mic Windshield
x1
Receiver (Type-C or
Lightning Connector)
x1
3. Indicator
* Note:The indicator identi󽗉cation shown as follows.
Left Right
2. Charge
Transmitter:
Charge the transmitter via the Type-C charging
port and charging cable.
Mobile Phone :
Insert your phone's charging cable into the Type-C port of the
receiver when in use, and the charging current is adjusted according
to the phone's battery max up to 800mA.
*Note: The receiver does not need to be charged and can be used
directly when plugged in the phone.
3. Paring
The transmitter and receiver will automatically start pairing once
power on.
*Note: For P1XT/L, each transmitter can only pair with a receiver.
Carrying Bag x1 User Manual x1

Tuotetiedot

Merkki: Synco
Kategoria: Mikrofoni
Malli: PX

Tarvitsetko apua?

Jos tarvitset apua merkille Synco PX esitä kysymys alla ja muut käyttäjät vastaavat sinulle