Sussex BMDSRH Käyttöohje

Sussex Nosturi BMDSRH

Lue alta 📖 käyttöohje suomeksi merkille Sussex BMDSRH (2 sivua) kategoriassa Nosturi. Tämä opas oli hyödyllinen 39 henkilölle ja sai 4.5 tähden keskimäärin 20 käyttäjältä

Sivu 1/2
2
NOGGING
80 mm
Backplate
Finished
Wall Surface
Set
Screw
Body
Apply Silicone
Masterfit
Apply Silicone
Stud Face
1
NOGGING
80 mm
Backplate
Finished
Wall Surface
Apply Silicone
Masterfit
Apply Silicone
Stud Face
Set
Screw
Handle
Body
Product code
Suba
BMDSRH Mixer diverter system
Mixer diverter system Dress kit
Diverter dress kit
Mixer dress kit
- Remove Mixer protective cover.
- Using silicon, seal the wall surface around the Mixer.
- Apply a small amount of silicon to the rear of the backplate prior to mounting onto the wall.
- Fit the handle body onto the Mixer Cartridge Lever ensuring the Handle is fully engaged.
- Secure the Handle Body by tightening the Set screw using the Allen Key provided (tighten well).
- Remove Mixer protective cover.
- Using silicone, seal the wall surface around the Diverter.
- Apply a small amount of silicone to the rear of the backplate prior to mounting onto the wall.
- Fit the Handle Body onto the Diver ter Adapter, ensure the Handle is fully engaged.
- Secure the Handle Body by tightening the Set screw using the Allen Key provided (tighten well).
To complete the installation, operate the Mixer(s) checking the flow of both hot and cold water from Outlet.
Check all fittings and fixtures for water leaks.
sussextaps.com.au
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.

Tuotetiedot

Merkki: Sussex
Kategoria: Nosturi
Malli: BMDSRH

Tarvitsetko apua?

Jos tarvitset apua merkille Sussex BMDSRH esitä kysymys alla ja muut käyttäjät vastaavat sinulle