Sunnydaze Decor GSI-547 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Sunnydaze Decor GSI-547 (2 sivua) kategoriassa Vesipumppu. Tämä opas oli hyödyllinen 30 henkilölle ja sai 4.8 tähden keskimäärin 15.5 käyttäjältä

Sivu 1/2
11/2023SPQ51037 Page 1 / 2
COPPER ORB OUTDOOR SLATE FOUNTAIN
GSI-547
Review all assembly and care information before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
  
ADecorative Top with M12 Nut 1
BPlate 1
CBasin w/ Built-in Electric Submersible Pump 1
DPedestal Top 1
EPedestal Bottom 1
FDecorative Stones 1 PK
IMPORTANT NOTES: Use care when unpacking and
assembling this fountain. Each fountain is cut from large slabs of
slate. Spalling (aking) may occur naturally over time, and/or if
slate is dropped.
Slate is a natural product; the colors and texture of each piece are
unique, no two fountains will look the same. Variations in the slate
colors and textures are not a cause for return.
2-PERSON
ASSEMBLY
RECOMMENDED
ASSEMBLY
1. Place Pedestal Top (D) onto Pedestal Bottom (E).
2. Gently set Basin (C) onto the pedestal and run the pump
power cord down through the pedestal and under the
groove in the back of the pedestal.
3. Remove the nut from Decorative Top (A). Then, use the
nut to secure Plate (B) to the bottom of the decorative top.
4. Connect the water tube on the pump to the decorative top
and gently place it on the center of the basin.
5. Fill the fountain with enough water to keep the pump fully
submerged during operation.
6. Plug the power cord into a properly grounded GFCI outlet.
7. Rinse Decorative Stones (F) with clean water and gently
place them inside the basin.
NOTE: When rst plugged in, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to ow.

Tuotetiedot

Merkki: Sunnydaze Decor
Kategoria: Vesipumppu
Malli: GSI-547

Tarvitsetko apua?

Jos tarvitset apua merkille Sunnydaze Decor GSI-547 esitä kysymys alla ja muut käyttäjät vastaavat sinulle