Sun Joe GTS4000E Käyttöohje
Sun Joe
Ruohonleikkuri
GTS4000E
Lue alta 📖 käyttöohje suomeksi merkille Sun Joe GTS4000E (16 sivua) kategoriassa Ruohonleikkuri. Tämä opas oli hyödyllinen 14 henkilölle ja sai 4.3 tähden keskimäärin 7.5 käyttäjältä
Sivu 1/16
© 2021 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC
OPERATOR’S MANUAL
Model GTS4000E Form No. SJ-GTS4000E-880E-MR3
R
LAWN + GARDEN MULTI-TOOL SYSTEM
HEDGE TRIMMER | POLE HEDGE TRIMMER | GRASS TRIMMER | GARDEN TILLER
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this power tool must read,
understand, and follow these instructions in their entirety.
Failure to follow these instructions may result in ELECTRIC
SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION,
and AWARENESS.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Before using the power tool, familiarize yourself with the
controls, especially how to stop the power tool in an
emergency. The only individuals who should use the power
tool are those who thoroughly understand these instructions
and know how to properly operate the unit. Children should
never be allowed access to the power tool.
Retain this manual for future reference and reread it at the start
of each season.
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cords immediately.
3. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls. Ensure
the controls (start/stop) function properly before using.
5. Use the right tool – Do not use this power tool for any job
except that for which it was intended.
6. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts.
Wear a protective covering to contain long hair.
Wearing rubber gloves and substantial non-slip footwear
is recommended when working outdoors.
7. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
8. Avoid accidental starting – Do not carry the power tool
with your nger on the switch. Make sure the switch is o
before plugging in or unplugging the unit.
mCAUTION! Moving parts will continue to run for several
seconds after turning o the machine.
9. Do not abuse the cord – Never carry the power tool
by the cord or yank the cord to disconnect it from the
receptacle. Keep the cord away from heat, oil, and
sharp edges.
10. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at
all times.
13. Use safety glasses – Also use safety footwear,
snug-tting clothing, protective gloves, hearing, and
head protection.
14. Disconnect the tool – Disconnect the power tool from
the power supply when it is not in use, before servicing
it, when changing accessories, and when performing any
other maintenance task.
15. Store idle tool indoors – When not in use, the power tool
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
16. Maintain the power tool with care – Keep the cutting
edges sharp and clean for optimal performance and
to reduce the risk of injury. Inspect the extension cord
periodically and immediately replace it if damaged.
Keep the handles dry, clean, and free from oil and grease.
Follow the additional recommendations described in the
maintenance section of this manual.
17. Avoid dangerous environments – Do not use the power
tool in rain or in damp or wet locations. Do not operate
the power tool in gaseous or explosive atmospheres or
use the power tool near ammable or combustible liquids.
Motors in these tools normally spark, and the sparks
might ignite fumes.
2
18. Stay alert – Watch what you are doing. Use common
sense. Do not operate the power tool when you are
tired or under the inuence of drugs, alcohol, or
other medication.
19. Check for damaged parts – Before further use of the
power tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may aect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Contact the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Specic Safety Warnings for Hedge
Trimmer/Pole Hedge Trimmer
1. Remove any adjusting key or wrench before turning
the power tool on. A wrench or key left attached to
the rotating part of the power tool may result in
personal injury.
2. If devices or facilities are available for the extraction
and collection of dust, ensure these are connected or
properly used. Use of these devices can reduce dust
related hazards.
3. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
4. Hold the pole hedge trimmer by insulated gripping
surfaces only, because the cutter blade may contact
hidden wiring or its own cord. Cutter blades contacting a
"live" wire may electrify exposed metal parts of the power
tool and could give the operator an electric shock.
5. Maintain a rm grip on both handles while cutting with the
blade. Keep the blade away from body.
6. Hold pole hedge trimmer properly, e.g., with both hands
if two handles are provided. Loss of control can cause
personal injury.
7. Keep extension cord away from cutting area. During
operation the extension cord may be hidden in shrubs and
can be accidentally cut by the blade.
8. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
9. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material. A moment of inattention while
operating the pole hedge trimmer may result in serious
personal injury.
10. Carry the hedge trimmer by the handle with the cutting
blade stopped. When transporting or storing the hedge
trimmer always keep the blade covered. Proper handling
of the hedge trimmer will reduce possible personal injury
from the cutter blades.
11. Do not use the hedge trimmer if the switch does not turn it
on and o. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
12. Use the pole hedge trimmer and accessories in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations dierent from
intended use could lead to a hazardous situation.
13. The product should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
Specic Safety Warnings for
Grass Trimmer
mCAUTION! The safety guard is critical to the safety of
the operator and the safety of people standing within a safe
distance of the grass trimmer. The safety guard keeps the unit
in good working order and must always be in place during
operation. Failure to have the guard in place during operation
is dangerous and will void the warranty.
1. Keep away from the cutting line – It can seriously injure
the skin.
2. Do not try to stop the cutting device with your hands –
Always let it come to a stop by itself.
mCAUTION! The trimmer line spool will continue to rotate
after turning the trimmer OFF. Wait until the trimmer line spool
has completely stopped before making contact.
3. Only use the same type of line originally provided with
the tool.
4. Do not use the unit to cut grass that is not in contact with
the ground.
5. Do not switch the grass trimmer ON in enclosed or
poorly ventilated spaces or in the presence of ammable
and/or explosive substances such as liquids, gases,
and powders.
6. The user of the grass trimmer is responsible for any
damage sustained by third parties that has been caused
by the grass trimmer within the working area.
7. Only cut during broad daylight or with adequate
articial light.
8. Do not cross roads or gravel paths while the unit is
still running.
9. When the grass trimmer is not in use, store it in a dry
place and out of the reach of children.
10. The grass trimmer must be operated in a vertical position,
perpendicular to the ground.
11. Check regularly that all screws are properly secured.
12. Never pass the grass trimmer over the extension cord when
the grass trimmer is in use as this could cut the cord.
Make sure you know where the cord is at all times.
3
13. Never use the grass trimmer when it is raining or when
excessively moist and humid conditions are present. Do not
cut damp grass or leave the tool outside overnight.
14. If the grass trimmer strikes a foreign object or becomes
entangled with it, stop the tool immediately. Unplug it,
check for damage, and have any damage repaired before
proceeding with operation. Do not operate the tool with a
broken hub or spool.
Specic Safety Warnings for
Garden Tiller
1. Always inspect the area where the tiller is to be used.
Remove all objects (e.g., stones, sticks, wires and foreign
objects) that could be thrown by the blades or cause the
operator to trip.
2. Thrown objects can cause serious injury to the eyes and
exposed body. Always wear safety glasses or eye shields
during operation and while performing an adjustment
or repair.
3. Always operate garden tiller wearing adequate garments.
Do not wear jewelry or other loose clothing, which could
become entangled in moving parts. Wear footwear that
provides sure footing.
4. Keep people, pets and property at least 25 feet from the
garden tiller while it is in operation. Stop the garden tiller if
people or pets enter the discharge area.
5. Never attempt to make any adjustments while the motor
is running.
6. Contact with the rotating parts can amputate hands and
feet. Do not put hands or feet near rotating parts.
7. Exercise extreme caution when operating on or crossing
gravel drives, walks, or roads. Stay alert for hidden
hazards or trac.
8. Always plan your culvitating pattern to avoid discharge of
material toward people, pets and property. Thrown objects
can cause serious personal injury.
9. Hold onto the garden tiller with both hands during
operation. Ensure the grips are dry.
10. After striking a foreign object, stop the motor, thoroughly
inspect the garden tiller for any damage, and repair the
damage before restarting and operating the garden tiller.
Disconnect the cord on electric motors.
11. Exercise caution to avoid slipping or falling.
12. Observe any noise-prevention regulations and laws.
13. If the garden tiller should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Vibration is generally a warning sign of trouble.
14. Disengage all controls, stop the motor and wait until
the blades come to a complete stop when leaving the
operating position, before unclogging the blades and
when making any repair, adjustments and inspections.
15. Before cleaning, repairing, or inspecting, shut o the
motor and make certain all moving parts have stopped.
Disconnect the cord on electric motors.
16. Never operate the garden tiller without proper guard,
plates, or other safety protective devices in place.
17. Do not overload the garden tiller capacity by attempting to
cultivate too deep at too fast a rate.
18. Never operate the garden tiller at high transport speeds on
hard or slippery surfaces.
19. Be careful when cultivating in hard ground. The blades
may catch in the ground and propel the garden tiller
forward. If this occurs, let go of the handlebars and do not
restrain the garden tiller.
20. Use extreme caution when reversing or pulling the garden
tiller towards you.
21. Switch on the motor carefully according to instructions
and with feet well away from the blades.
22. Never pick up or carry the garden tiller while the motor
is running.
23. Inspect the garden tiller for worn, missing or damaged
parts and safety labels. See maintenance section for
detailed instructions.
24. Exercise caution when changing direction and operating
on slopes. Always keep feet and legs a safe distance away
from the machine. Look for hidden obstacles or hazards.
25. Do not grasp the exposed cutting blades or cutting edges
when picking up or holding the appliance.
26. Always turn the tiller OFF and disconnect the electrical
power when there is a work stoppage or changing work
areas. Never leave the machine running when unattended.
27. The blades will continue to rotate for a short period after
turning the tiller OFF. Wait until the blades have completely
stopped before lifting the machine or conducting
inspection and maintenance.
28. The motor housing remains hot for a short period after the
machine is turned OFF. Allow the motor housing to cool o
before touching or storing near combustible material.
29. Regularly check the following:
i) Accumulation of debris around the blades could cause
a poor performance or damage to the motor. Inspect
and clean before every use.
ii) Safety devices are operating properly. Do not tamper
with or adjust safety devices.
iii) Bolts and screws for proper tightness. Visually inspect
machine for any damage and that the tiller is in safe
working condition.
iv) Always replace damaged parts with original equipment
manufacturer’s (OEM) parts only. Replacement parts
that do not meet the original equipment specications
may lead to improper performance and
compromise safety.
Tuotetiedot
| Merkki: | Sun Joe |
| Kategoria: | Ruohonleikkuri |
| Malli: | GTS4000E |
Tarvitsetko apua?
Jos tarvitset apua merkille Sun Joe GTS4000E esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ruohonleikkuri Sun Joe Käyttöohjeet
7 Helmikuuta 2025
Ruohonleikkuri Käyttöohjeet
- Ruohonleikkuri Aurora
- Ruohonleikkuri Makita
- Ruohonleikkuri Gude
- Ruohonleikkuri Anova
- Ruohonleikkuri NAC
- Ruohonleikkuri OK
- Ruohonleikkuri Black Decker
- Ruohonleikkuri Flymo
- Ruohonleikkuri Trisa
- Ruohonleikkuri Hurricane
- Ruohonleikkuri Gardena
- Ruohonleikkuri Cecotec
- Ruohonleikkuri BaByliss
- Ruohonleikkuri Rowenta
- Ruohonleikkuri Ryobi
Viimeisimmät Ruohonleikkuri Käyttöohjeet
5 Huhtikuuta 2025
2 Huhtikuuta 2025
1 Huhtikuuta 2025
31 Maaliskuuta 2025
29 Maaliskuuta 2025
27 Maaliskuuta 2025
27 Maaliskuuta 2025
27 Maaliskuuta 2025
13 Maaliskuuta 2025
12 Maaliskuuta 2025