StarTech.com QUAD-M2-PCIE-CARD-B Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille StarTech.com QUAD-M2-PCIE-CARD-B (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 46 henkilölle ja sai 4.6 tähden keskimäärin 6 käyttäjältä

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 1, 2022 3:39 PM

Product ID

QUAD-M2-PCIE-CARD-B

ComponentFunction

1LED Jumper Pins

• Connect to the LED Lights PCIe to M.2 Adapter

Card Drive to showactivity

2

Standos (x 4),

Stando Installation

Screws (x 4), and Drive

Mounting Screws (x 4)

• Secure to theM.2 Storage Devices PCIe to M.2

Adapter Card

• Compatible (NVMe and AHCI): PCIe M.2 SSDs

2242, 2260, 2280, and 22110 drives

3M.2 Connectors

• Connect to the M Keyed M.2 Storage Devices

PCIe to M.2 Adapter Card

4PCIe x16 Connector

• Connect the to the PCIe to M.2 Adapter Card

PCIe SlotComputer in a

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/QUAD-M2-PCIE-CARD-B

PCI Express x16 to Quad M.2 PCIe SSD Adapter with Bifurcation

Package Contents

• PCIe to M.2 Adapter Card x 1

• Quick-Start Guide x 1

• Set of Mounting Screws x 1

Requirements

• Computer x 1

• PCIe x16 Slot with Bifurcation Support

• Phillips Head Screwdriver x 1

• PCI Express M.2 SSD x 4

• Pliers x 1

Installation

WarningPCIe CardsInstaller: can be damaged by static electricity. Ensure that the

is properly grounded before they open the or touch the Computer CasePCIe to M.2

Adapter CardInstallerAnti-Static Strap. The should wear an when installing any

computer component. If an is not available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Grounded Metal Surface

Only handle the by its edges and do not touch the gold PCIe to M.2 Adapter Card

connectors.

Note: Computer/MotherboardConsult the documentation that came with the for

details regarding how to enable and congure PCIe Bifurcation.

Install the M.2 Storage Drives

1. Place the next to the and note the that DriveAdapterDrive Installation Holes

match the length of the . If the and are already DriveStandos Installation Screws

installed in the correct position, proceed to step 5.

2. On the front of the use to hold the in place while M.2 Adapter Card,PliersStando

using a to remove the located on the back of the Phillips Head ScrewdriverScrew,

Adapter.

3. Use the to remove the on the front of the Phillips Head ScrewdriverScrewM.2

Adapter Card.

4. Remove the .Stando

5. Repeat steps 2 - 3 to remove the remaining and StandosStando Installation

Screws as needed.

6. Install the in the that matches the length of the StandoDrive Installation Hole

Drive.

7. Gently slide the into the corresponding M.2 Drive Connector M.2 Connector,

locatedon the and press the down toward the adapter M.2 Adapter Card,Drive

until the is properly seatedDrive

Note:M.2 ConnectorDrive M Keyed M Keyed M.2 The on the isso that it only ts

Storage Devices

8. Replace the , removed in step 2, and tighten using a Stando Installation Screw

Philips Head Screwdriver.

3

2

4

1

Tuotetiedot