Starlight Xpress Lodestar PRO Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Starlight Xpress Lodestar PRO (6 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 28 henkilölle ja sai 4.3 tähden keskimäärin 14.5 käyttäjältä

Sivu 1/6
Lodestar PRO C handbook Issue 2, February 2024
Handbook for the SX ‘Lodestar PRO C’
Imaging and Guiding Camera
Thank you for purchasing a Starlight Xpress ’ camera. We hope that you will be Lodestar PRO Colour
very pleased with the performance of this product.
imager/guider, which is powered and operated via a single USB2.0 computer connection. It also
provides an opto-isolated output connection for direct control of most mounts, via their ‘Autoguider’
sockets. This output is compatible with the ‘ST4’ style of RJ12 connection and supplies 4 ‘pull down’
direction lines and a common return. Alternatively, you may send the mount control signals via a
serial connection from the guider control computer. The Lodestar PRO C utilises a very sensitive Sony
‘ExView2’ CCD (the ICX829AK) with an array of 752 x 580 pixels in a ‘half inch’ format. Although the -
chip is not cooled, it has a very low dark signal and very little readout noise, so it can be used to guide
on faint stars that are well beyond the reach of webcams and CMOS chip based guide cameras.

Tuotetiedot

Merkki: Starlight Xpress
Kategoria: Ei luokiteltu
Malli: Lodestar PRO

Tarvitsetko apua?

Jos tarvitset apua merkille Starlight Xpress Lodestar PRO esitä kysymys alla ja muut käyttäjät vastaavat sinulle